{"title":"Carltsoe Safety Non-Sparking Adjustable End Wrenches","description":"","products":[{"product_id":"cs-unitec-ex501-10a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-adjustable-end-wrench-10-250-mm","title":"Carltsoe Safety CS Unitec Ex501-10A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Adjustable End Wrench 10\" (250 mm) (501U-10A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-10A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-10A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-10A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-10A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/8\" (28 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 10\" (250 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.06 Lbs (0.48 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674331787555,"sku":"744344","price":148.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-10A_01_1dcdfeed-7b7a-4e09-9a04-275e8f4b1622.jpg?v=1785007257"},{"product_id":"cs-unitec-ex501-10b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-adjustable-end-wrench-10-250-mm","title":"Carltsoe Safety CS Unitec Ex501-10B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Adjustable End Wrench 10\" (250 mm) (501U-10B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-10B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-10B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-10B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-10B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/8\" (28 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 10\" (250 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.06 Lbs (0.48 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674332934435,"sku":"744345","price":290.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-10B_01_0dd5c665-9b74-4886-a47a-3c7a8a4a5779.jpg?v=1785007270"},{"product_id":"cs-unitec-ex501-12a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-adjustable-end-wrench-12-300-mm","title":"Carltsoe Safety CS Unitec Ex501-12A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Adjustable End Wrench 12\" (300 mm) (501U-12A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-12A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-12A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-12A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-12A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-3\/8\" (34 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12\" (300 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.68 Lbs (0.76 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674336080163,"sku":"744346","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-12A_01_47b05f29-8d5d-4cb1-addb-bf0d8fa0cc08.jpg?v=1785007282"},{"product_id":"cs-unitec-ex501-12b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-adjustable-end-wrench-12-300-mm","title":"Carltsoe Safety CS Unitec Ex501-12B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Adjustable End Wrench 12\" (300 mm) (501U-12B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-12B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-12B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-12B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-12B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-3\/8\" (34 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12\" (300 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.68 Lbs (0.76 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674337128739,"sku":"744347","price":304.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-12B_01.jpg?v=1785007295"},{"product_id":"cs-unitec-ex501-15a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-adjustable-end-wrench-15-375-mm","title":"Carltsoe Safety CS Unitec Ex501-15A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Adjustable End Wrench 15\" (375 mm) (501U-15A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-15A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-15A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-15A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-15A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-3\/4\" (45 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 15\" (375 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 3.13 Lbs (1.42 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674338373923,"sku":"744348","price":299.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-15A_01_3b33943e-0e51-4f61-ac5e-c664de6755a9.jpg?v=1785007308"},{"product_id":"cs-unitec-ex501-15b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-adjustable-end-wrench-15-375-mm","title":"Carltsoe Safety CS Unitec Ex501-15B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Adjustable End Wrench 15\" (375 mm) (501U-15B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-15B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-15B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-15B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-15B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-3\/4\" (45 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 15\" (375 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 3.13 Lbs (1.42 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674341749027,"sku":"744349","price":665.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-15B_01_c2b3a022-c98f-4989-bf0e-3e259063376e.jpg?v=1785007322"},{"product_id":"cs-unitec-ex501-18a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-adjustable-end-wrench-18-450-mm","title":"Carltsoe Safety CS Unitec Ex501-18A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Adjustable End Wrench 18\" (450 mm) (501U-18A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-18A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-18A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-18A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-18A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-3\/16\" (55 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 18\" (450 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 6.19 Lbs (2.81 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674342764835,"sku":"744350","price":415.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-18A_01_40a6011b-02eb-46bd-8774-806b5b0bab24.jpg?v=1785007336"},{"product_id":"cs-unitec-ex501-18b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-adjustable-end-wrench-18-450-mm","title":"Carltsoe Safety CS Unitec Ex501-18B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Adjustable End Wrench 18\" (450 mm) (501U-18B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-18B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-18B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-18B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-18B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-3\/16\" (55 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 18\" (450 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 6.19 Lbs (2.81 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674343977251,"sku":"744351","price":741.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-18B_01_06bcac1a-8d08-4397-b34a-e90049a614c2.jpg?v=1785007350"},{"product_id":"cs-unitec-ex501-24a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-adjustable-end-wrench-24-600-mm","title":"Carltsoe Safety CS Unitec Ex501-24A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Adjustable End Wrench 24\" (600 mm) (501U-24A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-24A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-24A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-24A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-24A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-3\/8\" (60 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 24\" (600 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 10.87 Lbs (4.93 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674345156899,"sku":"744352","price":695.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-24A_01_fbe93967-c035-4ee9-ac77-47d9ae4fcae7.jpg?v=1785007368"},{"product_id":"cs-unitec-ex501-24b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-adjustable-end-wrench-24-600-mm","title":"Carltsoe Safety CS Unitec Ex501-24B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Adjustable End Wrench 24\" (600 mm) (501U-24B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-24B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-24B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-24B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eCombination Box\/Open-End wrenches are designed for a wide variety of work. Their box opening adds more to their versatility and strength. The Flare Nut pattern with its hex box opening is especially useful in air conditioning and refrigeration work where tubing terminates on flare nuts. The thinner and slimmer pattern is designed for work where access and clearance are limited\u003c\/li\u003e\n\u003cli\u003eDo not use the open end of these wrenches to free a \"frozen\" nut or final tighten a hex nut. Use the box opening. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-24B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-3\/8\" (60 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 24\" (600 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 10.87 Lbs (4.93 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674346172707,"sku":"744353","price":993.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-24B_01_41a63852-22a4-4a1d-bbac-476c1f646148.jpg?v=1785007383"},{"product_id":"cs-unitec-ex501-6b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-adjustable-end-wrench-6-150-mm","title":"Carltsoe Safety CS Unitec Ex501-6B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Adjustable End Wrench 6\" (150 mm) (501U-6B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-6B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-6B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-6B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-6B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 3\/4\" (19 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 6\" (150 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.29 Lbs (0.13 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674347450659,"sku":"744354","price":152.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-6B_01.jpg?v=1785007401"},{"product_id":"cs-unitec-ex501-6a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-adjustable-end-wrench-6-150-mm","title":"Carltsoe Safety CS Unitec Ex501-6A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Adjustable End Wrench 6\" (150 mm) (501U-6A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-6A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-6A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-6A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-6A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 3\/4\" (19 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 6\" (150 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.29 Lbs (0.13 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674348499235,"sku":"744355","price":116.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-6A_01.jpg?v=1785007414"},{"product_id":"cs-unitec-ex501-8a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-adjustable-end-wrench-8-200-mm","title":"Carltsoe Safety CS Unitec Ex501-8A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Adjustable End Wrench 8\" (200 mm) (501U-8A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-8A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-8A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-8A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-8A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 15\/16\" (24 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 8\" (200 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.62 Lbs (0.28 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674349351203,"sku":"744356","price":110.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-8A_01_3fcfe1a2-3e04-4f9a-b2a6-cc26e4b5ae1a.jpg?v=1785007429"},{"product_id":"cs-unitec-ex501-8b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-adjustable-end-wrench-8-200-mm","title":"Carltsoe Safety CS Unitec Ex501-8B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Adjustable End Wrench 8\" (200 mm) (501U-8B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-8B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-8B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-8B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eAdjustable wrenches are designed to provide a wide range of capacity in a single tool and are a convenient wrench for service and repairmen, linemen, etc. They are not intended to replace fixed opening wrenches for production or general service work.\u003c\/li\u003e\n\u003cli\u003eDo not use an adjustable wrench to free a \"frozen\" nut or to final tighten a nut. Never pull on a loosely adjusted wrench. Never use a hammer or extension on this wrench.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex501-8B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 15\/16\" (24 mm) MAX\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 8\" (200 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.62 Lbs (0.28 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674350203171,"sku":"744357","price":249.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex501-8B_01.jpg?v=1785007443"}],"url":"https:\/\/toolup.com\/collections\/carltsoe-safety-non-sparking-adjustable-end-wrenches.oembed","provider":"Toolup","version":"1.0","type":"link"}