{"title":"Carltsoe Safety Non-Sparking Bung Wrenches","description":"","products":[{"product_id":"cs-unitec-ex110-400a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-bung-wrench","title":"Carltsoe Safety CS Unitec Ex110-400A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Bung Wrench (110U-400A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110-400A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110-400A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110-400A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eNever use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110-400A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 15-3\/4\" (400 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.28 Lbs (1.94 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670785667363,"sku":"741305","price":173.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex110-400A_01_456eb2d9-ceca-4230-b313-c2f0f5a9e73f.jpg?v=1784848654"},{"product_id":"cs-unitec-ex110-400b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-bung-wrench","title":"Carltsoe Safety CS Unitec Ex110-400B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Bung Wrench (110U-400B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110-400B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110-400B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110-400B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eNever use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110-400B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 15-3\/4\" (400 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.28 Lbs (1.94 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670787993891,"sku":"741308","price":275.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex110-400B_01_1b5a0d67-931b-477f-b3fa-3d4667fbbfd9.jpg?v=1784848699"},{"product_id":"cs-unitec-ex110es-305a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-bung-wrench-for-3-4-2-bungs","title":"Carltsoe Safety CS Unitec Ex110ES-305A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Bung Wrench (for 3\/4\" \u0026 2\" bungs) (110ESU-305A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110ES-305A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110ES-305A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110ES-305A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eNever use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110ES-305A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/16\" (305 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.65 Lbs (0.75 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670788682019,"sku":"741309","price":221.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex110ES-305A_01_50f2b125-f395-44be-8474-eada17ffb520.jpg?v=1784848712"},{"product_id":"cs-unitec-ex110s-385a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-bung-wrench-for-22-diff-bungs","title":"Carltsoe Safety CS Unitec Ex110S-385A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Bung Wrench (For 22 diff. Bungs) (110SU-385A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110S-385A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110S-385A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110S-385A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eNever use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110S-385A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 15-3\/8\" (385 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.01 Lbs (1.82 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670789599523,"sku":"741310","price":218.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex110S-385A_01_49696493-7752-4fca-9b0d-fcb09cec5956.jpg?v=1784848727"},{"product_id":"cs-unitec-ex110es-305b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-bung-wrench-for-3-4-2-bungs","title":"Carltsoe Safety CS Unitec Ex110ES-305B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Bung Wrench (for 3\/4\" \u0026 2\" bungs) (110ESU-305B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110ES-305B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110ES-305B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110ES-305B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eNever use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110ES-305B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/16\" (305 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.65 Lbs (0.75 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670790320419,"sku":"741311","price":290.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex110ES-305B_01_3a066384-5dc2-46e5-80cf-e80d7ca283d4.jpg?v=1784848740"},{"product_id":"cs-unitec-ex110s-385b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-bung-wrench-for-22-diff-bungs","title":"Carltsoe Safety CS Unitec Ex110S-385B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Bung Wrench (For 22 diff. Bungs) (110SU-385B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110S-385B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110S-385B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110S-385B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eNever use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex110S-385B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 15-3\/8\" (385 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.01 Lbs (1.82 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670793072931,"sku":"741312","price":428.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex110S-385B_01_7ef873bf-bab4-4d35-a00d-a7c6e2258397.jpg?v=1784848754"},{"product_id":"cs-unitec-ex213-22a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-square-end-bung-wrench-7-8-22-mm","title":"Carltsoe Safety CS Unitec Ex213-22A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Square End Bung Wrench 7\/8\" (22 mm) (213U-22A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-22A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-22A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-22A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eNever use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-22A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 7\/8\" (22 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 10-3\/16\" (255 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.41 Lbs (0.64 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674011611427,"sku":"744033","price":187.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex213-22A_01_12afb2c3-a417-49ff-bdc8-291d477644fa.jpg?v=1785002876"},{"product_id":"cs-unitec-ex213-27a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-square-end-bung-wrench-1-1-16-27-mm","title":"Carltsoe Safety CS Unitec Ex213-27A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Square End Bung Wrench 1-1\/16\" (27 mm) (213U-27A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-27A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-27A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-27A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eNever use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-27A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/16\" (27 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/8\" (310 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.65 Lbs (0.78 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674012070179,"sku":"744034","price":309.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex213-27A_01_fe049ff3-38f1-49d3-8308-75fdf00671f7.jpg?v=1785002889"},{"product_id":"cs-unitec-ex213-22b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-square-end-bung-wrench-7-8-22-mm","title":"Carltsoe Safety CS Unitec Ex213-22B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Square End Bung Wrench 7\/8\" (22 mm) (213U-22B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-22B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-22B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-22B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eNever use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-22B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 7\/8\" (22 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 10-3\/16\" (255 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.41 Lbs (0.64 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674012660003,"sku":"744035","price":275.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex213-22B_01_958a0e4d-70f3-4c20-a805-ac543cfd8b18.jpg?v=1785002901"},{"product_id":"cs-unitec-ex213-24b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-square-end-bung-wrench-15-16-24-mm","title":"Carltsoe Safety CS Unitec Ex213-24B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Square End Bung Wrench 15\/16\" (24 mm) (213U-24B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-24B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-24B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-24B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eNever use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-24B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 15\/16\" (24 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 10-3\/16\" (255 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.75 Lbs (0.78 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674013675811,"sku":"744036","price":339.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex213-24B_01_9223246f-7d6c-4992-863e-e418785e6d1b.jpg?v=1785002915"},{"product_id":"cs-unitec-ex213-27b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-square-end-bung-wrench-1-1-16-27-mm","title":"Carltsoe Safety CS Unitec Ex213-27B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Square End Bung Wrench 1-1\/16\" (27 mm) (213U-27B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-27B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-27B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-27B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eNever use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-27B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/16\" (27 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/8\" (310 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.65 Lbs (0.78 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674014429475,"sku":"744037","price":486.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex213-27B_01_e3007542-ffd8-4a74-95db-7afe9b776210.jpg?v=1785002928"},{"product_id":"cs-unitec-ex213-32a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-square-end-bung-wrench-1-1-4-32-mm","title":"Carltsoe Safety CS Unitec Ex213-32A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Square End Bung Wrench 1-1\/4\" (32 mm) (213U-32A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-32A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-32A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-32A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eNever use a hammer on any wrench other than a Striking Face wrench. Use a sledge type hammer. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-32A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/4\" (32 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/8\" (310 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 3.78 Lbs (1.71 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674015543587,"sku":"744038","price":329.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex213-32A_01_8b478077-4b46-4212-92e4-80ef6570bbb7.jpg?v=1785002941"},{"product_id":"cs-unitec-ex213-32b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-square-end-bung-wrench-1-1-4-32-mm","title":"Carltsoe Safety CS Unitec Ex213-32B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Square End Bung Wrench 1-1\/4\" (32 mm) (213U-32B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-32B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-32B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-32B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eOpen-End wrenches are designed for a wide variety of work. Their box opening adds still more to their versatility and strength. The Flare Nut pattern with its hex box opening is especially useful in air conditioning and refrigeration work where tubing terminates on flare nuts. The thinner and slimmer Electronic pattern is designed for work where access and clearance are limited.\u003c\/li\u003e\n\u003cli\u003eDo not use the open end of these wrenches to free a \"frozen\" nut or final tighten a hex nut. Use the box opening. Never use an extension on the wrench handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex213-32B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/4\" (32 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/8\" (310 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 3.78 Lbs (1.71 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674018263331,"sku":"744040","price":500.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex213-32B_01_3ff27183-8a9d-4fbc-8ff2-78c46c221f83.jpg?v=1785002970"}],"url":"https:\/\/toolup.com\/collections\/carltsoe-safety-non-sparking-bung-wrenches.oembed","provider":"Toolup","version":"1.0","type":"link"}