{"title":"Carltsoe Safety Non-Sparking Hand Tools","description":"","products":[{"product_id":"cs-unitec-ex1750-015ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-impact-socket-1-1-16-x-1-drive-x-2-3-16-depth","title":"Carltsoe Safety CS Unitec Ex1750-015UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Impact Socket 1-1\/16\" x 1\" Drive x 2-3\/16\" Depth (1750U-015UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-015UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-015UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Socket Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-015UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eSocket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1\/4\" to 1\". Drive size is a measure of capacity. Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.\u003c\/li\u003e\n\u003cli\u003eNever use a pipe extension or other form\nof \"cheater\" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut. If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness. Hand Sockets should never be used on power drive or impact wrenches.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-015UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 2-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.79 Lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670544298275,"sku":"405579","price":434.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1750-015UB_01.jpg?v=1765536880"},{"product_id":"cs-unitec-ex1750-025ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-impact-socket-1-1-4-x-1-drive-x-2-5-16-depth","title":"Carltsoe Safety CS Unitec Ex1750-025UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Impact Socket 1-1\/4\" x 1\" Drive x 2-5\/16\" Depth (1750U-025UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-025UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-025UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Socket Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-025UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eSocket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1\/4\" to 1\". Drive size is a measure of capacity. Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.\u003c\/li\u003e\n\u003cli\u003eNever use a pipe extension or other form\nof \"cheater\" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut. If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness. Hand Sockets should never be used on power drive or impact wrenches.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-025UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 2-5\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.90 Lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670544888099,"sku":"405580","price":461.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1750-025UB_01.jpg?v=1765536896"},{"product_id":"cs-unitec-ex1750-035ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-impact-socket-1-7-16-x-1-drive-x-2-1-2-depth","title":"Carltsoe Safety CS Unitec Ex1750-035UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Impact Socket 1-7\/16\" x 1\" Drive x 2-1\/2\" Depth (1750U-035UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-035UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-035UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Socket Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-035UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eSocket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1\/4\" to 1\". Drive size is a measure of capacity. Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.\u003c\/li\u003e\n\u003cli\u003eNever use a pipe extension or other form\nof \"cheater\" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut. If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness. Hand Sockets should never be used on power drive or impact wrenches.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-035UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-7\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 2-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.12 Lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670545707299,"sku":"405581","price":525.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1750-035UB_01.jpg?v=1765536911"},{"product_id":"cs-unitec-ex1750-045ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-impact-socket-1-5-8-x-1-drive-x-2-7-8-depth","title":"Carltsoe Safety CS Unitec Ex1750-045UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Impact Socket 1-5\/8\" x 1\" Drive x 2-7\/8\" Depth (1750U-045UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-045UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-045UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Socket Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-045UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eSocket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1\/4\" to 1\". Drive size is a measure of capacity. Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.\u003c\/li\u003e\n\u003cli\u003eNever use a pipe extension or other form\nof \"cheater\" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut. If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness. Hand Sockets should never be used on power drive or impact wrenches.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-045UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-5\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 2-7\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.49 Lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670547018019,"sku":"405583","price":620.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1750-045UB_01.jpg?v=1765536925"},{"product_id":"cs-unitec-ex1750-055ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-impact-socket-1-13-16-x-1-drive-x-2-7-8-depth","title":"Carltsoe Safety CS Unitec Ex1750-055UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Impact Socket 1-13\/16\" x 1\" Drive x 2-7\/8\" Depth (1750U-055UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-055UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-055UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Socket Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-055UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eSocket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1\/4\" to 1\". Drive size is a measure of capacity. Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.\u003c\/li\u003e\n\u003cli\u003eNever use a pipe extension or other form\nof \"cheater\" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut. If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness. Hand Sockets should never be used on power drive or impact wrenches.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-055UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-13\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 2-7\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.78 Lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670548721955,"sku":"405584","price":542.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1750-055UB_01.jpg?v=1765536940"},{"product_id":"cs-unitec-ex1750-060ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-impact-socket-2-x-1-drive-x-2-7-8-depth","title":"Carltsoe Safety CS Unitec Ex1750-060UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Impact Socket 2\" x 1\" Drive x 2-7\/8\" Depth (1750U-060UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-060UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-060UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Socket Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-060UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eSocket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1\/4\" to 1\". Drive size is a measure of capacity. Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.\u003c\/li\u003e\n\u003cli\u003eNever use a pipe extension or other form\nof \"cheater\" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut. If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness. Hand Sockets should never be used on power drive or impact wrenches.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-060UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 2-7\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 3.00 Lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670550917411,"sku":"405585","price":871.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1750-060UB_01.jpg?v=1765536956"},{"product_id":"cs-unitec-ex1750-065ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-impact-socket-2-3-16-x-1-drive-x-3-1-16-depth","title":"Carltsoe Safety CS Unitec Ex1750-065UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Impact Socket 2-3\/16\" x 1\" Drive x 3-1\/16\" Depth (1750U-065UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-065UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-065UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Socket Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-065UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eSocket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1\/4\" to 1\". Drive size is a measure of capacity. Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.\u003c\/li\u003e\n\u003cli\u003eNever use a pipe extension or other form\nof \"cheater\" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut. If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness. Hand Sockets should never be used on power drive or impact wrenches.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-065UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 3-1\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 3.48 Lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670551408931,"sku":"405586","price":849.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1750-065UB_01.jpg?v=1765536970"},{"product_id":"cs-unitec-ex1750-070ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-impact-socket-2-3-8-x-1-drive-x-3-1-8-depth","title":"Carltsoe Safety CS Unitec Ex1750-070UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Impact Socket 2-3\/8\" x 1\" Drive x 3-1\/8\" Depth (1750U-070UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-070UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-070UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Socket Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-070UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eSocket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1\/4\" to 1\". Drive size is a measure of capacity. Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.\u003c\/li\u003e\n\u003cli\u003eNever use a pipe extension or other form\nof \"cheater\" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut. If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness. Hand Sockets should never be used on power drive or impact wrenches.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-070UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 3-1\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.01 Lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670552228131,"sku":"405587","price":1203.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1750-070UB_01.jpg?v=1765536984"},{"product_id":"cs-unitec-ex1750-075ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-impact-socket-2-9-16-x-1-drive-x-3-1-8-depth","title":"Carltsoe Safety CS Unitec Ex1750-075UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Impact Socket 2-9\/16\" x 1\" Drive x 3-1\/8\" Depth (1750U-075UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-075UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-075UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Socket Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-075UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eSocket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1\/4\" to 1\". Drive size is a measure of capacity. Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.\u003c\/li\u003e\n\u003cli\u003eNever use a pipe extension or other form\nof \"cheater\" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut. If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness. Hand Sockets should never be used on power drive or impact wrenches.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-075UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 3-1\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.34 Lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670553669923,"sku":"405588","price":893.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1750-075UB_01.jpg?v=1765537000"},{"product_id":"cs-unitec-ex1750-080ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-impact-socket-2-3-4-x-1-drive-x-3-5-16-depth","title":"Carltsoe Safety CS Unitec Ex1750-080UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Impact Socket 2-3\/4\" x 1\" Drive x 3-5\/16\" Depth (1750U-080UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-080UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-080UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Socket Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-080UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eSocket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1\/4\" to 1\". Drive size is a measure of capacity. Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.\u003c\/li\u003e\n\u003cli\u003eNever use a pipe extension or other form\nof \"cheater\" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut. If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness. Hand Sockets should never be used on power drive or impact wrenches.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec EX1750-080UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 3-5\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) and Beryllium (Be) that are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.63 Lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670554456355,"sku":"405589","price":1084.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1750-080UB_01.jpg?v=1765537013"},{"product_id":"cs-unitec-ex1004-120b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-dust-pan","title":"Carltsoe Safety CS Unitec Ex1004-120B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Dust Pan (1004U-120B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1004-120B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1004-120B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Dust Pan Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1004-120B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1004-120B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 8\" (200 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 20-1\/2\" (520 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 4-3\/4\" (120 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.79 lbs (0.36 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670654136611,"sku":"741168","price":180.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1004-120B_01.jpg?v=1765559773"},{"product_id":"cs-unitec-ex1001-4a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-straight-handle-scratch-brush","title":"Carltsoe Safety CS Unitec Ex1001-4A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Straight Handle Scratch Brush (1001U-4A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1001-4A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1001-4A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Straight Handle Scratch Brush Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1001-4A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1001-4A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eLength\u003c\/td\u003e\n \u003ctd\u003e 11-3\/16\" (280 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Lead (Pb) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.44 lbs (0.20 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670655185187,"sku":"741169","price":44.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1001-4A_01.jpg?v=1765559789"},{"product_id":"cs-unitec-ex1005-270a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-round-point-shovel-with-nupla-handle","title":"Carltsoe Safety CS Unitec Ex1005-270A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Round Point Shovel with Nupla Handle (1005U-270A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1005-270A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1005-270A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Round Point Shovel with Nupla Handle Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1005-270A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1005-270A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 10.6\" (270 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 60\" (1520 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 9.45\" (240 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 5.16 lbs (2.34 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670656102691,"sku":"741170","price":394.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1005-270A_01.jpg?v=1765559803"},{"product_id":"cs-unitec-ex1001-3a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-straight-handle-scratch-brush","title":"Carltsoe Safety CS Unitec Ex1001-3A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Straight Handle Scratch Brush (1001U-3A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1001-3A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1001-3A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Straight Handle Scratch Brush Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1001-3A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1001-3A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eLength\u003c\/td\u003e\n \u003ctd\u003e 11-3\/16\" (280 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Lead (Pb) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.33 lbs (0.15 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670656463139,"sku":"741171","price":40.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1001-3A_01.jpg?v=1765559832"},{"product_id":"cs-unitec-ex1002-5a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-flat-back-scratch-brush","title":"Carltsoe Safety CS Unitec Ex1002-5A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Flat Back Scratch Brush (1002U-5A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1002-5A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1002-5A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Flat Back Scratch Brush Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1002-5A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1002-5A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eLength\u003c\/td\u003e\n \u003ctd\u003e 7-3\/8\" (185 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Lead (Pb) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.66 lbs (0.3 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670657478947,"sku":"741172","price":50.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1002-5A_01_e362944c-dee8-442c-841a-12a090b278ab.jpg?v=1728693443"},{"product_id":"cs-unitec-ex1005d-270a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-round-point-shovel-with-nupla-handle","title":"Carltsoe Safety CS Unitec Ex1005D-270A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Round Point Shovel with Nupla Handle (1005DU-270A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1005D-270A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1005D-270A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Round Point Shovel with Nupla Handle Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1005D-270A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1005D-270A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 10.6\" (270 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 38-9\/16\" (980 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 9.45\" (240 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 6.26 lbs (2.84 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670657904931,"sku":"741173","price":394.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1005D-270A_01.jpg?v=1765559850"},{"product_id":"cs-unitec-ex1006-280a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-round-point-shovel-with-nupla-handle","title":"Carltsoe Safety CS Unitec Ex1006-280A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Round Point Shovel with Nupla Handle (1006U-280A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1006-280A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1006-280A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Round Point Shovel with Nupla Handle Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1006-280A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1006-280A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 11\" (280 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 60\" (1520 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 9.45\" (240 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 5.93 lbs (2.69 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670658691363,"sku":"741174","price":394.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1006-280A_01.jpg?v=1765559864"},{"product_id":"cs-unitec-ex1007-180a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-edging-spade-with-d-grip","title":"Carltsoe Safety CS Unitec Ex1007-180A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Edging Spade with D-Grip (1007U-180A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1007-180A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1007-180A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Edging Spade with D-Grip Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1007-180A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1007-180A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 11-3\/8\" (285 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 45-1\/4\" (1150 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 7-3\/16\" (180 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.62 lbs (1.19 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670659248419,"sku":"741175","price":638.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1007-180A_01.jpg?v=1765559881"},{"product_id":"cs-unitec-ex1006d-280a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-round-point-shovel-with-nupla-handle","title":"Carltsoe Safety CS Unitec Ex1006D-280A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Round Point Shovel with Nupla Handle (1006DU-280A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1006D-280A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1006D-280A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Round Point Shovel with Nupla Handle Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1006D-280A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1006D-280A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 11\" (280 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 38-9\/16\" (980 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 9.45\" (240 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.83 lbs (2.19 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670661017891,"sku":"741176","price":394.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1006D-280A_01.jpg?v=1765559896"},{"product_id":"cs-unitec-ex1007-180b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-edging-spade-with-d-grip","title":"Carltsoe Safety CS Unitec Ex1007-180B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Edging Spade with D-Grip (1007U-180B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1007-180B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1007-180B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Edging Spade with D-Grip Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1007-180B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1007-180B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 11-3\/8\" (285 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 45-1\/4\" (1150 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 7-3\/16\" (180 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.62 lbs (1.19 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670661738787,"sku":"741177","price":1019.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1007-180B_01.jpg?v=1765559910"},{"product_id":"cs-unitec-ex1008-420a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-16-3-4-railroad-clay-pick","title":"Carltsoe Safety CS Unitec Ex1008-420A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 16-3\/4\" Railroad\/Clay Pick (1008U-420A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-420A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-420A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Railroad\/ Clay Pick Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-420A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-420A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 1\" (25 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 36\" (920 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 16-3\/4\" (420 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.65 lbs (1.20 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670663573795,"sku":"741178","price":297.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1008-420A_01.jpg?v=1765559925"},{"product_id":"cs-unitec-ex1008-560a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-22-3-8-railroad-clay-pick","title":"Carltsoe Safety CS Unitec Ex1008-560A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 22-3\/8\" Railroad\/Clay Pick (1008U-560A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-560A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-560A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Railroad\/ Clay Pick Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-560A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-560A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 1-3\/16\" (30 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 36\" (920 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 22-3\/8\" (560 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.54 lbs (2.06 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670664950051,"sku":"741179","price":359.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1008-560A_01.jpg?v=1765559940"},{"product_id":"cs-unitec-ex1008-420b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-16-3-4-railroad-clay-pick","title":"Carltsoe Safety CS Unitec Ex1008-420B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 16-3\/4\" Railroad\/Clay Pick (1008U-420B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-420B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-420B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Railroad\/ Clay Pick Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-420B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-420B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 1-3\/16\" (30 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 36\" (920 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 22-3\/8\" (560 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.54 lbs (2.06 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670665376035,"sku":"741180","price":381.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1008-420B_01.jpg?v=1765559956"},{"product_id":"cs-unitec-ex1008-560b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-22-3-8-railroad-clay-pick","title":"Carltsoe Safety CS Unitec Ex1008-560B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 22-3\/8\" Railroad\/Clay Pick (1008U-560B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-560B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-560B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Railroad\/ Clay Pick Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-560B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-560B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 1-3\/8\" (35 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 36\" (920 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 25-9\/16\" (640 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 9.85 lbs (4.47 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670666457379,"sku":"741181","price":525.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1008-560B_01.jpg?v=1765559970"},{"product_id":"cs-unitec-ex1008-640a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-25-9-16-railroad-clay-pick","title":"Carltsoe Safety CS Unitec Ex1008-640A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 25-9\/16\" Railroad\/Clay Pick (1008U-640A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-640A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-640A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Railroad\/ Clay Pick Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-640A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-640A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 1-3\/8\" (35 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 36\" (920 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 25-9\/16\" (640 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 9.85 lbs (4.47 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670666719523,"sku":"741182","price":421.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1008-640A_01.jpg?v=1765559985"},{"product_id":"cs-unitec-ex1009-300a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-rake","title":"Carltsoe Safety CS Unitec Ex1009-300A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Rake (1009U-300A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1009-300A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1009-300A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Railroad\/ Clay Pick Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1009-300A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1009-300A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 53-1\/8\" (1350 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 12\" (300 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.73 lbs (0.33 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670667833635,"sku":"741183","price":272.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1009-300A_01.jpg?v=1765560001"},{"product_id":"cs-unitec-ex1008-640b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-25-9-16-railroad-clay-pick","title":"Carltsoe Safety CS Unitec Ex1008-640B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 25-9\/16\" Railroad\/Clay Pick (1008U-640B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-640B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-640B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Railroad\/ Clay Pick Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-640B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1008-640B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 1-3\/8\" (35 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 36\" (920 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 25-9\/16\" (640 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 9.85 lbs (4.47 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670669177123,"sku":"741185","price":595.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1008-640B_01.jpg?v=1765560030"},{"product_id":"cs-unitec-ex1009-300b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-rake","title":"Carltsoe Safety CS Unitec Ex1009-300B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Rake (1009U-300B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1009-300B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1009-300B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Railroad\/ Clay Pick Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1009-300B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1009-300B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 53-1\/8\" (1350 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 12\" (300 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.73 lbs (0.33 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670670553379,"sku":"741187","price":376.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1009-300B_01.jpg?v=1765560061"},{"product_id":"cs-unitec-ex1010-175b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-garden-fork","title":"Carltsoe Safety CS Unitec Ex1010-175B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Garden Fork (1010U-175B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1010-175B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1010-175B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Garden Fork Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1010-175B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1010-175B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 11-3\/16\" (280 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 52-3\/4\" (1340 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 7\" (175 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.10 lbs (1.86 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670670946595,"sku":"741188","price":878.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1010-175B_01.jpg?v=1765560076"},{"product_id":"cs-unitec-ex1010-175a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-garden-fork","title":"Carltsoe Safety CS Unitec Ex1010-175A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Garden Fork (1010U-175A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1010-175A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1010-175A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Garden Fork Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1010-175A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1010-175A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 11-3\/16\" (280 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 52-3\/4\" (1340 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 7\" (175 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.10 lbs (1.86 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670672191779,"sku":"741189","price":550.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1010-175A_01.jpg?v=1765560092"},{"product_id":"cs-unitec-ex1013-310b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-carbide-drum-opener","title":"Carltsoe Safety CS Unitec Ex1013-310B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Carbide Drum Opener (1013U-310B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1013-310B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1013-310B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Carbide Drum Opener Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1013-310B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1013-310B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 3\" (75 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/8\" (310 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 1-3\/4\" (45 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.58 lbs (0.71 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670672912675,"sku":"741190","price":309.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1013-310B_01.jpg?v=1765560107"},{"product_id":"cs-unitec-ex1013-310a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-carbide-drum-opener","title":"Carltsoe Safety CS Unitec Ex1013-310A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Carbide Drum Opener (1013U-310A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1013-310A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1013-310A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Carbide Drum Opener Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1013-310A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1013-310A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 3\" (75 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/8\" (310 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 1-3\/4\" (45 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.58 lbs (0.71 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670673895715,"sku":"741191","price":238.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1013-310A_01.jpg?v=1765560121"},{"product_id":"cs-unitec-ex1014-450a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-scraper-pick-and-scaler","title":"Carltsoe Safety CS Unitec Ex1014-450A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Scraper, Pick, and Scaler (1014U-450A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1014-450A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1014-450A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Scraper, Pick, and Scaler Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1014-450A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1014-450A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 17-23\/32\" (450 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 3\" (75 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.43 lbs (1.10 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670674583843,"sku":"741192","price":295.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1014-450A_01.jpg?v=1765560135"},{"product_id":"cs-unitec-ex1014-450b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-scraper-pick-and-scaler","title":"Carltsoe Safety CS Unitec Ex1014-450B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Scraper, Pick, and Scaler (1014U-450B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1014-450B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1014-450B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Scraper, Pick, and Scaler Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1014-450B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1014-450B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 17-23\/32\" (450 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 3\" (75 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.43 lbs (1.10 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670676779299,"sku":"741193","price":484.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1014-450B_01.jpg?v=1765560149"},{"product_id":"cs-unitec-ex1017-300a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-bucket","title":"Carltsoe Safety CS Unitec Ex1017-300A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Bucket (1017U-300A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1017-300A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1017-300A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Bucket Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1017-300A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1017-300A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 10-1\/4\" (260 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Lead (Pb) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 6.61 lbs (3 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670677139747,"sku":"741194","price":195.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1017-300A_01.jpg?v=1765560160"},{"product_id":"cs-unitec-ex1015-200a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-mixing-planters-hoe","title":"Carltsoe Safety CS Unitec Ex1015-200A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Mixing\/Planter's Hoe (1015U-200A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1015-200A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1015-200A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Mixing\/ Planter's Hoe Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1015-200A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1015-200A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 4\" (200 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 36\" (920 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 4\" (200 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.14 lbs (1.88 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670678090019,"sku":"741195","price":335.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1015-200A_01.jpg?v=1765560176"},{"product_id":"cs-unitec-ex1015-200b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-mixing-planters-hoe","title":"Carltsoe Safety CS Unitec Ex1015-200B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Mixing\/Planter's Hoe (1015U-200B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1015-200B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1015-200B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Mixing\/ Planter's Hoe Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1015-200B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003ePipe cutter wheels that are nicked or otherwise damaged should be replaced. When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool. Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron. Other wheels are available for stainless steel, plastic and other materials.\u003c\/li\u003e\n\u003cli\u003eIf there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex1015-200B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension B\u003c\/td\u003e\n \u003ctd\u003e 4\" (200 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 36\" (920 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension A\u003c\/td\u003e\n \u003ctd\u003e 4\" (200 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.14 lbs (1.88 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670678417699,"sku":"741196","price":574.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex1015-200B_01.jpg?v=1765560190"},{"product_id":"cs-unitec-ex101u-0025a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-ball-peen-hammer-0-25-lbs-0-12-kg","title":"Carltsoe Safety CS Unitec Ex101U-0025A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Ball Peen Hammer 0.25 lbs (0.12 Kg) (101UU-0025A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0025A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0025A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0025A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0025A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 0.25 lbs (0.12 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 10\" (250mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.25 lbs (0.12 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670679269667,"sku":"741197","price":52.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0025A_01.jpg?v=1765560211"},{"product_id":"cs-unitec-ex101u-0025b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-ball-peen-hammer-0-25-lbs-0-12-kg","title":"Carltsoe Safety CS Unitec Ex101U-0025B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Ball Peen Hammer 0.25 lbs (0.12 Kg) (101UU-0025B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0025B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0025B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0025B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0025B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 0.25 lbs (0.12 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 10\" (250mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.25 lbs (0.12 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670679990563,"sku":"741198","price":68.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0025B_01.jpg?v=1765560229"},{"product_id":"cs-unitec-ex101u-0075b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-ball-peen-hammer-0-75-lbs-0-34-kg","title":"Carltsoe Safety CS Unitec Ex101U-0075B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Ball Peen Hammer 0.75 lbs (0.34 Kg) (101UU-0075B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0075B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0075B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0075B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0075B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 0.75 lbs (0.34 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 13-3\/4\" (350mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.75 lbs (0.34 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670682120483,"sku":"741199","price":121.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0075B_01.jpg?v=1765560247"},{"product_id":"cs-unitec-ex101u-0100a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-ball-peen-hammer-1-lbs-0-46-kg","title":"Carltsoe Safety CS Unitec Ex101U-0100A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Ball Peen Hammer 1 Lbs (0.46 Kg) (101UU-0100A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0100A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0100A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0100A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0100A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 1 Lbs (0.46 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 13-3\/4\" (350mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1 Lbs (0.46 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670682579235,"sku":"741200","price":77.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0100A_01.jpg?v=1765560265"},{"product_id":"cs-unitec-ex101u-0075a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-ball-peen-hammer-0-75-lbs-0-34-kg","title":"Carltsoe Safety CS Unitec Ex101U-0075A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Ball Peen Hammer 0.75 lbs (0.34 Kg) (101UU-0075A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0075A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0075A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0075A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0075A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 0.75 lbs (0.34 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 13-3\/4\" (350mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.75 lbs (0.34 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670684152099,"sku":"741201","price":74.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0075A_01.jpg?v=1765560282"},{"product_id":"cs-unitec-ex101u-0100b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-ball-peen-hammer-1-lbs-0-46-kg","title":"Carltsoe Safety CS Unitec Ex101U-0100B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Ball Peen Hammer 1 Lbs (0.46 Kg) (101UU-0100B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0100B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0100B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0100B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0100B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 1 Lbs (0.46 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 13-3\/4\" (350mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1 Lbs (0.46 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670700044579,"sku":"741202","price":147.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0100B_01.jpg?v=1765560299"},{"product_id":"cs-unitec-ex101u-0150a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-ball-peen-hammer-1-5-lbs-0-68-kg","title":"Carltsoe Safety CS Unitec Ex101U-0150A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Ball Peen Hammer 1.5 Lbs (0.68 Kg) (101UU-0150A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0150A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0150A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0150A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0150A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 1.5 Lbs (0.68 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 14\" (360mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.5 Lbs (0.68 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670701289763,"sku":"741203","price":96.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0150A_01.jpg?v=1765560318"},{"product_id":"cs-unitec-ex101u-0150b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-ball-peen-hammer-1-5-lbs-0-68-kg","title":"Carltsoe Safety CS Unitec Ex101U-0150B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Ball Peen Hammer 1.5 Lbs (0.68 Kg) (101UU-0150B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0150B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0150B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0150B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0150B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 1.5 Lbs (0.68 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 14\" (360mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.5 Lbs (0.68 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carltsoe Safety","offers":[{"title":"Default Title","offer_id":48670701781283,"sku":"741204","price":192.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0150B_01.jpg?v=1765560336"},{"product_id":"cs-unitec-ex101u-0225a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-ball-peen-hammer-2-25-lbs-1-02-kg","title":"Carltsoe Safety CS Unitec Ex101U-0225A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Ball Peen Hammer 2.25 Lbs (1.02 Kg) (101UU-0225A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0225A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0225A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0225A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0225A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 2.25 Lbs (1.02 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 14\" (360mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.25 Lbs (1.02 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670702829859,"sku":"741205","price":124.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0225A_01.jpg?v=1765560353"},{"product_id":"cs-unitec-ex101u-0200a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-ball-peen-hammer-2-lbs-0-91-kg","title":"Carltsoe Safety CS Unitec Ex101U-0200A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Ball Peen Hammer 2 Lbs (0.91 Kg) (101UU-0200A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0200A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0200A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0200A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0200A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 2 Lbs (0.91 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 14\" (360mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2 Lbs (0.91 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670703485219,"sku":"741206","price":101.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0200A_01.jpg?v=1765560371"},{"product_id":"cs-unitec-ex101u-0200b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-ball-peen-hammer-2-lbs-0-91-kg","title":"Carltsoe Safety CS Unitec Ex101U-0200B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Ball Peen Hammer 2 Lbs (0.91 Kg) (101UU-0200B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0200B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0200B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0200B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0200B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 2 Lbs (0.91 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 14\" (360mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2 Lbs (0.91 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670705058083,"sku":"741207","price":272.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0200B_01.jpg?v=1765560387"},{"product_id":"cs-unitec-ex101u-0225b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-ball-peen-hammer-2-25-lbs-1-02-kg","title":"Carltsoe Safety CS Unitec Ex101U-0225B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Ball Peen Hammer 2.25 Lbs (1.02 Kg) (101UU-0225B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0225B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0225B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0225B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0225B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 2.25 Lbs (1.02 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 14\" (360mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.25 Lbs (1.02 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670705516835,"sku":"741208","price":281.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0225B_01.jpg?v=1765560404"},{"product_id":"cs-unitec-ex101u-0275a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-ball-peen-hammer-2-75-lbs-1-25-kg","title":"Carltsoe Safety CS Unitec Ex101U-0275A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Ball Peen Hammer 2.75 Lbs (1.25 Kg) (101UU-0275A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0275A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0275A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Hammer Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0275A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eBall peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.\nWhen striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3\/8\" larger than the struck face of the tool.\u003c\/li\u003e\n\u003cli\u003eStrike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex101U-0275A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension H\u003c\/td\u003e\n \u003ctd\u003e 2.75 Lbs (1.25 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eHandle Length\u003c\/td\u003e\n \u003ctd\u003e 14\" (360mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.75 Lbs (1.25 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48670706499875,"sku":"741209","price":142.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex101U-0275A_01.jpg?v=1765560427"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/collections\/media_49b9da70-1ea9-4cc9-b3e0-a75173afbad2.jpg?v=1782189231","url":"https:\/\/toolup.com\/collections\/carltsoe-safety-non-sparking-hand-tools.oembed?page=54","provider":"Toolup","version":"1.0","type":"link"}