{"title":"Carltsoe Safety Non-Sparking Open End Striking Wrenches","description":"","products":[{"product_id":"cs-unitec-ex200-010ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-11-16","title":"Carltsoe Safety CS Unitec Ex200-010UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 11\/16\" (200U-010UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-010UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-010UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-010UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-010UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 11\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 5-9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.40 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672063127843,"sku":"742418","price":172.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-010UB_01_18aff58d-2095-497e-b4e7-3a46f236421a.jpg?v=1784865515"},{"product_id":"cs-unitec-ex200-010ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-11-16","title":"Carltsoe Safety CS Unitec Ex200-010UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 11\/16\" (200U-010UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-010UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-010UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-010UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-010UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 11\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 5-9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.40 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672063947043,"sku":"742419","price":95.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-010UA_01_ff2a8584-dcfa-471d-b5f5-3fd7e3ae813e.jpg?v=1784865531"},{"product_id":"cs-unitec-ex200-015ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-3-4","title":"Carltsoe Safety CS Unitec Ex200-015UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 3\/4\" (200U-015UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-015UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-015UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-015UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-015UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 5-9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.42 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672064635171,"sku":"742420","price":180.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-015UB_01_5dbee4b4-6333-4df0-880b-1438f721cb82.jpg?v=1784865547"},{"product_id":"cs-unitec-ex200-015ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-3-4","title":"Carltsoe Safety CS Unitec Ex200-015UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 3\/4\" (200U-015UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-015UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-015UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-015UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-015UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 5-9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.42 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672065716515,"sku":"742421","price":99.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-015UA_01_9775bbd0-94eb-4213-8890-9b42524409f9.jpg?v=1784865563"},{"product_id":"cs-unitec-ex200-020ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-7-8","title":"Carltsoe Safety CS Unitec Ex200-020UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 7\/8\" (200U-020UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-020UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-020UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-020UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-020UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 7\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 6\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.57 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672066273571,"sku":"742422","price":119.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-020UA_01_737683da-a463-405a-b521-835dc4784911.jpg?v=1784865579"},{"product_id":"cs-unitec-ex200-020ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-7-8","title":"Carltsoe Safety CS Unitec Ex200-020UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 7\/8\" (200U-020UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-020UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-020UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-020UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-020UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 7\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 6\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.57 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672067944739,"sku":"742423","price":180.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-020UB_01_2aae3aef-1085-4e07-b2aa-400161f40548.jpg?v=1784865595"},{"product_id":"cs-unitec-ex200-025ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-15-16","title":"Carltsoe Safety CS Unitec Ex200-025UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 15\/16\" (200U-025UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-025UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-025UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-025UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-025UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 15\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 6-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.73 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672068403491,"sku":"742424","price":200.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-025UB_01_7ceae5a3-a36e-4139-814b-8d35aa2bf1aa.jpg?v=1784865612"},{"product_id":"cs-unitec-ex200-025ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-15-16","title":"Carltsoe Safety CS Unitec Ex200-025UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 15\/16\" (200U-025UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-025UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-025UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-025UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-025UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 15\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 6-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.73 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672068927779,"sku":"742425","price":133.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-025UA_01_594a2e4b-43e8-44d3-8a68-d32a851f7d2d.jpg?v=1784865632"},{"product_id":"cs-unitec-ex200-030ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1","title":"Carltsoe Safety CS Unitec Ex200-030UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1\" (200U-030UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-030UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-030UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-030UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-030UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 7-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.95 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672069452067,"sku":"742426","price":164.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-030UA_01_95b6c0aa-edfa-4f1d-8d63-baf71ef8da13.jpg?v=1784865648"},{"product_id":"cs-unitec-ex200-030ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1","title":"Carltsoe Safety CS Unitec Ex200-030UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1\" (200U-030UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-030UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-030UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-030UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-030UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 7-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.95 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672071680291,"sku":"742427","price":200.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-030UB_01_65f3f5ba-9442-4825-b495-dfcbd67b2736.jpg?v=1784865664"},{"product_id":"cs-unitec-ex200-040ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-1-8","title":"Carltsoe Safety CS Unitec Ex200-040UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-1\/8\" (200U-040UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-040UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-040UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-040UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-040UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 7-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.95 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672072466723,"sku":"742428","price":259.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-040UB_01_e82596c7-5630-4fe6-88a2-a88ec58d19e4.jpg?v=1784865682"},{"product_id":"cs-unitec-ex200-035ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-1-16","title":"Carltsoe Safety CS Unitec Ex200-035UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-1\/16\" (200U-035UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-035UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-035UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-035UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-035UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 7-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.95 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672072991011,"sku":"742429","price":259.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-035UB_01_26cdeb8e-bb31-4ad8-a59f-b5b970f29f24.jpg?v=1784865702"},{"product_id":"cs-unitec-ex200-035ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-1-16","title":"Carltsoe Safety CS Unitec Ex200-035UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-1\/16\" (200U-035UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-035UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-035UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-035UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-035UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 7-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.95 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672073580835,"sku":"742430","price":199.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-035UA_01_14c419f3-26eb-49ce-bb77-bfe8e937f439.jpg?v=1784865719"},{"product_id":"cs-unitec-ex200-040ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-1-8","title":"Carltsoe Safety CS Unitec Ex200-040UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-1\/8\" (200U-040UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-040UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-040UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-040UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-040UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 7-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.95 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672074334499,"sku":"742431","price":199.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-040UA_01_0b4e3b4e-b5a6-49bf-88f3-6fb26f5a4b48.jpg?v=1784865737"},{"product_id":"cs-unitec-ex200-045ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-3-16","title":"Carltsoe Safety CS Unitec Ex200-045UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-3\/16\" (200U-045UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-045UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-045UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-045UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-045UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 7-9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.17 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672074760483,"sku":"742432","price":239.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-045UA_01_9be711cc-c125-4df1-b174-6502b9b44d90.jpg?v=1784865753"},{"product_id":"cs-unitec-ex200-045ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-3-16","title":"Carltsoe Safety CS Unitec Ex200-045UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-3\/16\" (200U-045UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-045UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-045UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-045UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-045UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 7-9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.17 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672075350307,"sku":"742433","price":311.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-045UB_01_8a95c434-3308-4903-8a5e-21b303031ba3.jpg?v=1784865769"},{"product_id":"cs-unitec-ex200-050ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-1-4","title":"Carltsoe Safety CS Unitec Ex200-050UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-1\/4\" (200U-050UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-050UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-050UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-050UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-050UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 7-9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.17 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672075940131,"sku":"742434","price":239.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-050UA_01_863ac739-89c9-494a-a5d5-fdd5ad35bd18.jpg?v=1784865786"},{"product_id":"cs-unitec-ex200-050ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-1-4","title":"Carltsoe Safety CS Unitec Ex200-050UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-1\/4\" (200U-050UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-050UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-050UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-050UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-050UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 7-9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.17 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672078627107,"sku":"742435","price":311.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-050UB_01_82251bfd-4a97-4289-8cad-1bed5a52f893.jpg?v=1784865805"},{"product_id":"cs-unitec-ex200-055ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-5-16","title":"Carltsoe Safety CS Unitec Ex200-055UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-5\/16\" (200U-055UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-055UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-055UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-055UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-055UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-5\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 7-3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.28 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672079184163,"sku":"742436","price":239.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-055UA_01_496809d7-6950-4c7e-be2e-f8e7cca427ef.jpg?v=1784865821"},{"product_id":"cs-unitec-ex200-055ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-5-16","title":"Carltsoe Safety CS Unitec Ex200-055UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-5\/16\" (200U-055UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-055UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-055UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-055UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-055UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-5\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 7-3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.28 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672079741219,"sku":"742437","price":311.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-055UB_01_a2cdfab0-f469-4e5d-a5b1-5507c3cc33e2.jpg?v=1784865837"},{"product_id":"cs-unitec-ex200-060ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-3-8","title":"Carltsoe Safety CS Unitec Ex200-060UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-3\/8\" (200U-060UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-060UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-060UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-060UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-060UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 8-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.87 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672080429347,"sku":"742438","price":296.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-060UA_01_6f68632e-4948-44c1-a313-82e24aaa2f86.jpg?v=1784865853"},{"product_id":"cs-unitec-ex200-065ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-7-16","title":"Carltsoe Safety CS Unitec Ex200-065UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-7\/16\" (200U-065UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-065UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-065UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-065UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-065UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-7\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 8-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.87 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672081019171,"sku":"742439","price":296.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-065UA_01_12952e67-5d92-4759-a68f-f93020c5a97c.jpg?v=1784865870"},{"product_id":"cs-unitec-ex200-060ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-3-8","title":"Carltsoe Safety CS Unitec Ex200-060UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-3\/8\" (200U-060UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-060UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-060UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-060UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-060UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 8-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.87 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672081641763,"sku":"742440","price":386.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-060UB_01_760f38d9-ebe3-4057-83e3-acf7486e623a.jpg?v=1784988146"},{"product_id":"cs-unitec-ex200-065ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-7-16","title":"Carltsoe Safety CS Unitec Ex200-065UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-7\/16\" (200U-065UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-065UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-065UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-065UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-065UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-7\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 8-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.87 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672082329891,"sku":"742441","price":386.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-065UB_01_3dfae47e-8f51-4c9a-b88c-1b770d17088e.jpg?v=1784865923"},{"product_id":"cs-unitec-ex200-070ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-1-2","title":"Carltsoe Safety CS Unitec Ex200-070UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-1\/2\" (200U-070UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-070UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-070UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-070UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-070UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 8-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.16 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672083149091,"sku":"742442","price":296.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-070UA_01_34291340-21bc-4ac5-b20e-c3fbcc4eb7b3.jpg?v=1784865941"},{"product_id":"cs-unitec-ex200-070ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-1-2","title":"Carltsoe Safety CS Unitec Ex200-070UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-1\/2\" (200U-070UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-070UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-070UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-070UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-070UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 8-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.16 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672083673379,"sku":"742443","price":386.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-070UB_01_dbf2fbd0-4e64-46ff-bf8c-78e194032873.jpg?v=1784865958"},{"product_id":"cs-unitec-ex200-075ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-9-16","title":"Carltsoe Safety CS Unitec Ex200-075UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-9\/16\" (200U-075UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-075UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-075UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-075UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-075UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 8-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.20 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672084263203,"sku":"742444","price":352.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-075UA_01_4c480a60-fa00-44e9-8d8a-0b64b6fea24f.jpg?v=1784865976"},{"product_id":"cs-unitec-ex200-075ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-9-16","title":"Carltsoe Safety CS Unitec Ex200-075UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-9\/16\" (200U-075UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-075UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-075UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-075UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-075UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 8-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.20 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672084918563,"sku":"742445","price":457.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-075UB_01_721672dc-2cc0-4c9c-beb2-dfd07d62668b.jpg?v=1784865993"},{"product_id":"cs-unitec-ex200-080ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-5-8","title":"Carltsoe Safety CS Unitec Ex200-080UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-5\/8\" (200U-080UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-080UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-080UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-080UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-080UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-5\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 9\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.29 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672085541155,"sku":"742446","price":352.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-080UA_01_fedf644b-97bb-4ad1-9bb4-2e84c4ee7dd1.jpg?v=1784866010"},{"product_id":"cs-unitec-ex200-080ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-5-8","title":"Carltsoe Safety CS Unitec Ex200-080UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-5\/8\" (200U-080UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-080UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-080UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-080UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-080UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-5\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 9\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.29 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672086130979,"sku":"742447","price":562.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-080UB_01_e0720188-2184-4b17-8600-2fcd37447441.jpg?v=1784866027"},{"product_id":"cs-unitec-ex200-085ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-11-16","title":"Carltsoe Safety CS Unitec Ex200-085UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-11\/16\" (200U-085UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-085UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-085UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-085UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-085UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-11\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 9\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.81 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672086753571,"sku":"742448","price":352.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-085UA_01_7d48e1eb-d23a-43b5-9612-abf92a356af8.jpg?v=1784866043"},{"product_id":"cs-unitec-ex200-085ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-11-16","title":"Carltsoe Safety CS Unitec Ex200-085UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-11\/16\" (200U-085UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-085UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-085UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-085UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-085UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-11\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 9\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.81 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672087408931,"sku":"742449","price":457.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-085UB_01_e15adf17-bc11-4f1c-830e-48c93da69a46.jpg?v=1784866065"},{"product_id":"cs-unitec-ex200-090ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-3-4","title":"Carltsoe Safety CS Unitec Ex200-090UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-3\/4\" (200U-090UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-090UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-090UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-090UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-090UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 9\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.81 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672088031523,"sku":"742450","price":352.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-090UA_01_63597dc0-98f3-46df-957c-bf0d047dc8ef.jpg?v=1784866083"},{"product_id":"cs-unitec-ex200-090ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-3-4","title":"Carltsoe Safety CS Unitec Ex200-090UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-3\/4\" (200U-090UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-090UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-090UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-090UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-090UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 9\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.81 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672088916259,"sku":"742451","price":457.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-090UB_01_e63e425b-1639-4a3b-b714-d6d38f0b41d0.jpg?v=1784866100"},{"product_id":"cs-unitec-ex200-095ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-13-16","title":"Carltsoe Safety CS Unitec Ex200-095UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-13\/16\" (200U-095UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-095UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-095UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-095UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-095UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-13\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 9\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 3.26 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672089473315,"sku":"742452","price":431.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-095UA_01_b94069e2-fe67-4b1e-8552-d78ac915ed46.jpg?v=1784866118"},{"product_id":"cs-unitec-ex200-095ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-13-16","title":"Carltsoe Safety CS Unitec Ex200-095UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-13\/16\" (200U-095UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-095UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-095UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-095UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-095UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-13\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 9\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 3.26 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672090030371,"sku":"742453","price":559.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-095UB_01_554b2fe0-2f1c-4f7d-b1d5-226e7112f0e0.jpg?v=1784866141"},{"product_id":"cs-unitec-ex200-100ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-1-7-8","title":"Carltsoe Safety CS Unitec Ex200-100UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 1-7\/8\" (200U-100UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-100UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-100UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-100UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-100UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-7\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 11\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 3.52 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672090489123,"sku":"742454","price":431.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-100UA_01_ce9a68f2-e008-4532-9cc3-402f000eacc0.jpg?v=1784866157"},{"product_id":"cs-unitec-ex200-100ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-1-7-8","title":"Carltsoe Safety CS Unitec Ex200-100UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 1-7\/8\" (200U-100UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-100UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-100UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-100UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-100UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 1-7\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 11\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 3.52 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672093045027,"sku":"742455","price":688.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-100UB_01_b03c4a2d-76ab-47dd-ac14-f2bcd68c0bcb.jpg?v=1784866173"},{"product_id":"cs-unitec-ex200-105ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-2","title":"Carltsoe Safety CS Unitec Ex200-105UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 2\" (200U-105UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-105UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-105UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-105UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-105UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 11-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 3.77 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672093667619,"sku":"742456","price":499.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-105UA_01_e029fa2e-aec8-434c-aa53-fe0af8de539e.jpg?v=1784866190"},{"product_id":"cs-unitec-ex200-105ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-2","title":"Carltsoe Safety CS Unitec Ex200-105UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 2\" (200U-105UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-105UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-105UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-105UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-105UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 11-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 3.77 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672094257443,"sku":"742457","price":797.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-105UB_01_ec7ffbfa-4254-437c-a9f8-2d4481c2e66c.jpg?v=1784866205"},{"product_id":"cs-unitec-ex200-115ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-2-1-8","title":"Carltsoe Safety CS Unitec Ex200-115UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 2-1\/8\" (200U-115UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-115UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-115UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-115UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-115UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-1\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.85 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672094716195,"sku":"742458","price":499.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-115UA_01_c43810f3-fba2-4d80-877b-1ff2af8712c3.jpg?v=1784866221"},{"product_id":"cs-unitec-ex200-110ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-2-1-16","title":"Carltsoe Safety CS Unitec Ex200-110UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 2-1\/16\" (200U-110UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-110UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-110UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-110UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-110UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-1\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 11-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.85 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672095174947,"sku":"742459","price":499.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-110UA_01_e0d71298-7108-46c0-b464-5fe1cd0ef1fe.jpg?v=1784866237"},{"product_id":"cs-unitec-ex200-110ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-2-1-16","title":"Carltsoe Safety CS Unitec Ex200-110UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 2-1\/16\" (200U-110UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-110UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-110UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-110UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-110UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-1\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 11-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.85 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672095699235,"sku":"742460","price":647.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-110UB_01_da80776c-e27a-4ed6-95ac-9104fe669f37.jpg?v=1784866253"},{"product_id":"cs-unitec-ex200-115ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-2-1-8","title":"Carltsoe Safety CS Unitec Ex200-115UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 2-1\/8\" (200U-115UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-115UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-115UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-115UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-115UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-1\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.85 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672096190755,"sku":"742461","price":647.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-115UB_01_8d7dba2a-ac27-4528-82fd-1ea158f4d5d7.jpg?v=1784866270"},{"product_id":"cs-unitec-ex200-120ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-2-3-16","title":"Carltsoe Safety CS Unitec Ex200-120UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 2-3\/16\" (200U-120UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-120UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-120UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-120UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-120UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.85 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672096813347,"sku":"742462","price":568.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-120UA_01_85ce31b8-c521-43d5-b203-b73ad44e7f7d.jpg?v=1784866287"},{"product_id":"cs-unitec-ex200-120ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-2-3-16","title":"Carltsoe Safety CS Unitec Ex200-120UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 2-3\/16\" (200U-120UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-120UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-120UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-120UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-120UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.85 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672097698083,"sku":"742463","price":738.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-120UB_01_a3a9b41b-f139-48e2-8219-8023e6c4cfc9.jpg?v=1784866304"},{"product_id":"cs-unitec-ex200-125ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-2-1-4","title":"Carltsoe Safety CS Unitec Ex200-125UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 2-1\/4\" (200U-125UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-125UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-125UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-125UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-125UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.85 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672098451747,"sku":"742464","price":738.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-125UB_01_72e97a31-4080-4117-a699-e241572855e8.jpg?v=1784866320"},{"product_id":"cs-unitec-ex200-125ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-2-1-4","title":"Carltsoe Safety CS Unitec Ex200-125UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 2-1\/4\" (200U-125UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-125UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-125UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-125UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-125UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 4.85 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672099500323,"sku":"742465","price":568.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-125UA_01_b8aa2707-13da-4d37-a6fc-8b10cb463ea5.jpg?v=1784866337"},{"product_id":"cs-unitec-ex200-130ua-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-striking-wrench-open-end-2-5-16","title":"Carltsoe Safety CS Unitec Ex200-130UA Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Striking Wrench, Open End 2-5\/16\" (200U-130UA)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-130UA Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-130UA Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-130UA Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-130UA Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-5\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 6.08 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672100221219,"sku":"742466","price":568.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-130UA_01_cd4e2ec1-a655-4d2d-8409-a6c86ceef370.jpg?v=1784866353"},{"product_id":"cs-unitec-ex200-130ub-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-striking-wrench-open-end-2-5-16","title":"Carltsoe Safety CS Unitec Ex200-130UB Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Striking Wrench, Open End 2-5\/16\" (200U-130UB)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-130UB Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-130UB Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Striking Wrench Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-130UB Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex200-130UB Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimension S\u003c\/td\u003e\n \u003ctd\u003e 2-5\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eDimension I\u003c\/td\u003e\n \u003ctd\u003e 12-3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 6.08 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48672103399715,"sku":"742467","price":738.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex200-130UB_01_fddf6c15-d7ab-469e-89b5-dff8730ca382.jpg?v=1784866370"}],"url":"https:\/\/toolup.com\/collections\/carltsoe-safety-non-sparking-open-end-striking-wrenches.oembed?page=4","provider":"Toolup","version":"1.0","type":"link"}