{"title":"CS Unitec Chisels","description":"","products":[{"product_id":"cs-unitec-ex304-100b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-9-16-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-100B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 9\/16\" Hand Chisel (304U-100B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-100B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-100B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-100B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-100B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.20 Lbs (0.09 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674187346211,"sku":"744203","price":83.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-100B_02.jpg?v=1785005292"},{"product_id":"cs-unitec-ex304-100a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-9-16-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-100A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 9\/16\" Hand Chisel (304U-100A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-100A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-100A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-100A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-100A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.20 Lbs (0.09 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674187804963,"sku":"744204","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-100A_01_676f0934-abcb-4d5d-b1c6-c323680f8ad7.jpg?v=1785005306"},{"product_id":"cs-unitec-ex304-125b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-9-16-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-125B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 9\/16\" Hand Chisel (304U-125B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-125B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-125B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-125B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-125B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e .26 Lbs (0.12 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674188099875,"sku":"744205","price":81.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-125B_01_eec1a14e-3b47-4f48-8eec-4d2b15c558b9.jpg?v=1785005319"},{"product_id":"cs-unitec-ex304-125a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-9-16-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-125A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 9\/16\" Hand Chisel (304U-125A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-125A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-125A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-125A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-125A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e .26 Lbs (0.12 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674188722467,"sku":"744206","price":48.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-125A_01_7675caf8-b2c8-4514-b4eb-4419799f2346.jpg?v=1785005333"},{"product_id":"cs-unitec-ex304-150b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-11-16-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-150B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 11\/16\" Hand Chisel (304U-150B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-150B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-150B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-150B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-150B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e .45 Lbs (0.20 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674190229795,"sku":"744207","price":112.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-150B_01_8558372d-e0d1-42cd-8d33-c6fa5a2b50e7.jpg?v=1785005346"},{"product_id":"cs-unitec-ex304-150a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-11-16-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-150A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 11\/16\" Hand Chisel (304U-150A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-150A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-150A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-150A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-150A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e .45 Lbs (0.20 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674190754083,"sku":"744208","price":71.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-150A_01_bcdcaf72-f030-4b81-91a5-86c26f73352c.jpg?v=1785005359"},{"product_id":"cs-unitec-ex304-175a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-3-4-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-175A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 3\/4\" Hand Chisel (304U-175A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-175A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-175A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-175A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-175A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e .68 Lbs (0.31 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674191507747,"sku":"744209","price":107.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-175A_01_6aace686-057c-42bc-b550-5c5c346ad147.jpg?v=1785005372"},{"product_id":"cs-unitec-ex304-200a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-7-8-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-200A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 7\/8\" Hand Chisel (304U-200A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-200A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-200A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-200A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-200A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e .90 Lbs (0.41 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674192326947,"sku":"744210","price":82.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-200A_01_bcbeaa1f-c0c5-4c3d-9d27-cce94fb1c08c.jpg?v=1785005387"},{"product_id":"cs-unitec-ex304-175b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-3-4-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-175B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 3\/4\" Hand Chisel (304U-175B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-175B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-175B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-175B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-175B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e .68 Lbs (0.31 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674192752931,"sku":"744211","price":140.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-175B_01_788af564-a28f-4dd8-ad7e-441cb5f87a09.jpg?v=1785005401"},{"product_id":"cs-unitec-ex304-250b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-15-16-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-250B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 15\/16\" Hand Chisel (304U-250B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-250B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-250B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-250B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-250B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.28 Lbs (0.58 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674193375523,"sku":"744212","price":260.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-250B_01_6f32e093-9557-4472-bc4a-58022eb81a7a.jpg?v=1785005415"},{"product_id":"cs-unitec-ex304-250a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-15-16-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-250A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 15\/16\" Hand Chisel (304U-250A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-250A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-250A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-250A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-250A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.28 Lbs (0.58 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674193899811,"sku":"744213","price":86.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-250A_01_8ea30f80-c089-4af4-a6ad-fcffac3b4aa7.jpg?v=1785005428"},{"product_id":"cs-unitec-ex304-200b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-7-8-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-200B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 7\/8\" Hand Chisel (304U-200B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-200B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-200B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-200B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-200B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e .90 Lbs (0.41 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674194948387,"sku":"744214","price":165.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-200B_01_20019a35-c697-4f34-b911-c0ec2bd3ac8d.jpg?v=1785005440"},{"product_id":"cs-unitec-ex304-300b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-15-16-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-300B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 15\/16\" Hand Chisel (304U-300B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-300B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-300B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-300B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-300B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.52 Lbs (0.96 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674195439907,"sku":"744215","price":309.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-300B_01_25f824a9-005c-4f44-9aff-6b2ee0e4d546.jpg?v=1785005454"},{"product_id":"cs-unitec-ex304-300a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-15-16-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-300A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 15\/16\" Hand Chisel (304U-300A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-300A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-300A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-300A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-300A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.52 Lbs (0.96 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674196062499,"sku":"744216","price":101.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-300A_01_bea77c7b-9f45-4c05-9727-763b1e75acfd.jpg?v=1785005469"},{"product_id":"cs-unitec-ex304-400b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-1-1-16-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-400B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 1-1\/16\" Hand Chisel (304U-400B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-400B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-400B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-400B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-400B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.71 Lbs (1.23 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674196750627,"sku":"744217","price":520.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-400B_01_dec1dadf-8581-489e-977f-66c7a96e209b.jpg?v=1785005482"},{"product_id":"cs-unitec-ex304-400a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-1-1-16-hand-chisel","title":"Carltsoe Safety CS Unitec Ex304-400A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 1-1\/16\" Hand Chisel (304U-400A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-400A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-400A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-400A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304-400A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.71 Lbs (1.23 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674198421795,"sku":"744218","price":146.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304-400A_01_32b6c34a-d9a2-416c-8cd9-f4d44cc792db.jpg?v=1785005495"},{"product_id":"cs-unitec-ex304s-300a-alluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-11-16-8-point-chisel","title":"Carltsoe Safety CS Unitec Ex304S-300A Alluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 11\/16\" 8-Point Chisel (304SU-300A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304S-300A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304S-300A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304S-300A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304S-300A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.48 Lbs (0.67 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674199011619,"sku":"744219","price":177.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304S-300A_01_be69d20e-af52-4322-8025-dca9fc62a834.jpg?v=1785005509"},{"product_id":"cs-unitec-ex304a-300a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-5-8-6-point-chisel","title":"Carltsoe Safety CS Unitec Ex304A-300A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 5\/8\" 6-Point Chisel (304AU-300A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304A-300A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304A-300A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304A-300A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304A-300A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.95 Lbs (0.43 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674200224035,"sku":"744220","price":177.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304A-300A_01_672a8f10-a66f-4ca3-93ba-8671049e4cc5.jpg?v=1785005522"},{"product_id":"cs-unitec-ex304a-300b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-5-8-6-point-chisel","title":"Carltsoe Safety CS Unitec Ex304A-300B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 5\/8\" 6-Point Chisel (304AU-300B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304A-300B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304A-300B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304A-300B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304A-300B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.95 Lbs (0.43 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674200912163,"sku":"744221","price":284.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304A-300B_01_e9b08a84-8606-4d92-8ff3-85016e94bdca.jpg?v=1785005536"},{"product_id":"cs-unitec-ex304s-300b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-11-16-8-point-chisel","title":"Carltsoe Safety CS Unitec Ex304S-300B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 11\/16\" 8-Point Chisel (304SU-300B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304S-300B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304S-300B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304S-300B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex304S-300B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.48 Lbs (0.67 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674201993507,"sku":"744222","price":284.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex304S-300B_01_e0afeb51-f145-44cd-8dd0-ebbcef69916f.jpg?v=1785005550"},{"product_id":"cs-unitec-ex305-150a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-6-cape-chisel","title":"Carltsoe Safety CS Unitec Ex305-150A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 6\" Cape Chisel (305U-150A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-150A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-150A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-150A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-150A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.51 Lbs (0.23 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674203042083,"sku":"744223","price":54.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex305-150A_01_43ef9a64-cb5a-4ee0-a9b3-02ed158bf963.jpg?v=1785005563"},{"product_id":"cs-unitec-ex305-150b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-6-cape-chisel","title":"Carltsoe Safety CS Unitec Ex305-150B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 6\" Cape Chisel (305U-150B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-150B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-150B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-150B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-150B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.51 Lbs (0.23 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674203795747,"sku":"744224","price":103.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex305-150B_01_843b0646-78a5-408f-9726-8db2ae207bc3.jpg?v=1785005576"},{"product_id":"cs-unitec-ex305-200a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-8-cape-chisel","title":"Carltsoe Safety CS Unitec Ex305-200A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 8\" Cape Chisel (305U-200A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-200A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-200A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-200A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-200A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.81 Lbs (0.37 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674204549411,"sku":"744225","price":80.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex305-200A_01_f210a06e-f97c-4957-9da9-6dc187a3ccb8.jpg?v=1785005589"},{"product_id":"cs-unitec-ex305-200b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-8-cape-chisel","title":"Carltsoe Safety CS Unitec Ex305-200B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 8\" Cape Chisel (305U-200B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-200B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-200B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-200B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-200B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.81 Lbs (0.37 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674205073699,"sku":"744226","price":200.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex305-200B_01_7ec46dc0-bf65-4ca5-ba87-af4da881c7e5.jpg?v=1785005602"},{"product_id":"cs-unitec-ex305-300a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-12-cape-chisel","title":"Carltsoe Safety CS Unitec Ex305-300A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 12\" Cape Chisel (305U-300A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-300A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-300A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-300A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-300A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.68 Lbs (0.76 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674205663523,"sku":"744227","price":153.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex305-300A_01_6b5cf7e1-5965-4b93-b13c-05936a0ffecc.jpg?v=1785005615"},{"product_id":"cs-unitec-ex306-200b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-8-bull-point-chisel","title":"Carltsoe Safety CS Unitec Ex306-200B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 8\" Bull Point Chisel (306U-200B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-200B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-200B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-200B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-200B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.57 Lbs (0.26 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674206318883,"sku":"744228","price":101.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex306-200B_01_4fa1392e-9b23-4a5e-a687-f60017095bfc.jpg?v=1785005628"},{"product_id":"cs-unitec-ex306-250a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-10-bull-point-chisel","title":"Carltsoe Safety CS Unitec Ex306-250A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 10\" Bull Point Chisel (306U-250A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-250A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-250A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-250A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-250A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.94 Lbs (0.43 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674207564067,"sku":"744229","price":91.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex306-250A_01_92534679-2daf-49e8-be7f-5c313bf89af9.jpg?v=1785005642"},{"product_id":"cs-unitec-ex305-300b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-12-cape-chisel","title":"Carltsoe Safety CS Unitec Ex305-300B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 12\" Cape Chisel (305U-300B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-300B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-300B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-300B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex305-300B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.68 Lbs (0.76 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674208153891,"sku":"744230","price":286.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex305-300B_01_982cac4a-a657-4d2b-84f1-c5d73aae5275.jpg?v=1785005658"},{"product_id":"cs-unitec-ex306-200a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-8-bull-point-chisel","title":"Carltsoe Safety CS Unitec Ex306-200A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 8\" Bull Point Chisel (306U-200A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-200A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-200A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-200A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-200A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.57 Lbs (0.26 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674209038627,"sku":"744231","price":79.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex306-200A_01_4f3009b2-67f9-457b-be28-53706472296e.jpg?v=1785005670"},{"product_id":"cs-unitec-ex306-250b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-10-bull-point-chisel","title":"Carltsoe Safety CS Unitec Ex306-250B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 10\" Bull Point Chisel (306U-250B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-250B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-250B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-250B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-250B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.94 Lbs (0.43 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674210087203,"sku":"744232","price":123.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex306-250B_01_f0140961-84f1-499e-a985-db7dce9e3773.jpg?v=1785005684"},{"product_id":"cs-unitec-ex306-400a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-16-bull-point-chisel","title":"Carltsoe Safety CS Unitec Ex306-400A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 16\" Bull Point Chisel (306U-400A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-400A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-400A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-400A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-400A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.40 Lbs (1.09 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674210840867,"sku":"744233","price":154.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex306-400A_01_cc49c26e-771f-49df-b40c-4394ed6df5d4.jpg?v=1785005698"},{"product_id":"cs-unitec-ex306-400b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-16-bull-point-chisel","title":"Carltsoe Safety CS Unitec Ex306-400B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 16\" Bull Point Chisel (306U-400B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-400B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-400B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-400B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-400B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.40 Lbs (1.09 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674211594531,"sku":"744234","price":202.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex306-400B_01_80a275c5-6825-4119-84d8-e5c79abfdb72.jpg?v=1785005712"},{"product_id":"cs-unitec-ex306-300b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-12-bull-point-chisel","title":"Carltsoe Safety CS Unitec Ex306-300B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 12\" Bull Point Chisel (306U-300B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-300B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-300B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-300B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-300B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.43 Lbs (0.65 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674212479267,"sku":"744235","price":168.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex306-300B_01_75d25694-e780-40c2-9f2a-6581c48bbbc7.jpg?v=1785005726"},{"product_id":"cs-unitec-ex306-300a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-12-bull-point-chisel","title":"Carltsoe Safety CS Unitec Ex306-300A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 12\" Bull Point Chisel (306U-300A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-300A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-300A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-300A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex306-300A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.43 Lbs (0.65 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674213331235,"sku":"744236","price":101.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex306-300A_01_e16b36e1-ca6b-4e7e-b14e-b883bf666fa1.jpg?v=1785005739"},{"product_id":"cs-unitec-ex307-200b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-8-diamond-point-chisel","title":"Carltsoe Safety CS Unitec Ex307-200B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 8\" Diamond Point Chisel (307U-200B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-200B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-200B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-200B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-200B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.58 Lbs (0.26 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674215854371,"sku":"744237","price":168.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex307-200B_01_a2466f85-be9e-4577-9b39-7c366776e453.jpg?v=1785005755"},{"product_id":"cs-unitec-ex307-200a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-8-diamond-point-chisel","title":"Carltsoe Safety CS Unitec Ex307-200A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 8\" Diamond Point Chisel (307U-200A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-200A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-200A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-200A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-200A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.58 Lbs (0.26 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674216608035,"sku":"744238","price":93.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex307-200A_01_9835a094-e6af-48c8-b5af-ca1553ccb0dc.jpg?v=1785005766"},{"product_id":"cs-unitec-ex307-250b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-10-diamond-point-chisel","title":"Carltsoe Safety CS Unitec Ex307-250B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 10\" Diamond Point Chisel (307U-250B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-250B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-250B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-250B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-250B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.94 Lbs (0.43 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674217820451,"sku":"744239","price":205.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex307-250B_01_1ccd61dc-6661-4a3f-a970-ea6cb4266ecd.jpg?v=1785005781"},{"product_id":"cs-unitec-ex307-250a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-10-diamond-point-chisel","title":"Carltsoe Safety CS Unitec Ex307-250A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 10\" Diamond Point Chisel (307U-250A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-250A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-250A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-250A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-250A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.94 Lbs (0.43 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674219163939,"sku":"744240","price":95.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex307-250A_01_cc5b3fce-a851-491b-a18c-948351fe18ff.jpg?v=1785005796"},{"product_id":"cs-unitec-ex307-300a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-12-diamond-point-chisel","title":"Carltsoe Safety CS Unitec Ex307-300A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 12\" Diamond Point Chisel (307U-300A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-300A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-300A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-300A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-300A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.44 Lbs (0.65 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674220048675,"sku":"744241","price":97.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex307-300A_01_637f7159-4e58-455d-a72f-75fdbd9cabf1.jpg?v=1785005810"},{"product_id":"cs-unitec-ex307-400a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-16-diamond-point-chisel","title":"Carltsoe Safety CS Unitec Ex307-400A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 16\" Diamond Point Chisel (307U-400A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-400A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-400A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-400A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-400A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.41 Lbs (1.09 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674221031715,"sku":"744242","price":150.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex307-400A_01_a86b0339-e841-4aa7-8dc2-f414424aea77.jpg?v=1785005825"},{"product_id":"cs-unitec-ex307-300b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-12-diamond-point-chisel","title":"Carltsoe Safety CS Unitec Ex307-300B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 12\" Diamond Point Chisel (307U-300B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-300B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-300B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-300B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-300B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 1.44 Lbs (0.65 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674221588771,"sku":"744243","price":243.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex307-300B_01_434fad29-251c-459b-9f79-1628318c6e89.jpg?v=1785005839"},{"product_id":"cs-unitec-ex307-400b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-16-diamond-point-chisel","title":"Carltsoe Safety CS Unitec Ex307-400B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 16\" Diamond Point Chisel (307U-400B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-400B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-400B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-400B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNever use chisels for cutting or splitting stone or\nconcrete. Never use a dull chisel or one with a\nmushroomed\nhead. Never use a chisel with a loose or\ndamaged handle.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex307-400B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 2.41 Lbs (1.09 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674223685923,"sku":"744246","price":298.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex307-400B_01_6496dc4f-c187-4ea6-8b74-c1bd05fcc984.jpg?v=1785005854"},{"product_id":"cs-unitec-ex309ah-20a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-pneumatic-chisel-401-round-collar-round-shank","title":"Carltsoe Safety CS Unitec Ex309AH-20A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Pneumatic Chisel .401 round collar, round shank (309AHU-20A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex309AH-20A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex309AH-20A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex309AH-20A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex309AH-20A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.50 Lbs (0.18 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674239054115,"sku":"744258","price":96.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex309AH-20A_01.jpg?v=1785006013"},{"product_id":"cs-unitec-ex309ah-20b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-pneumatic-chisel-401-round-collar-round-shank","title":"Carltsoe Safety CS Unitec Ex309AH-20B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Pneumatic Chisel .401 round collar, round shank (309AHU-20B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex309AH-20B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex309AH-20B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex309AH-20B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex309AH-20B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.50 Lbs (0.18 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674240397603,"sku":"744260","price":86.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex309AH-20B_01_1807be42-292e-491d-9601-d8dc1e83a82c.jpg?v=1785006042"},{"product_id":"cs-unitec-ex310ah-32a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-pneumatic-chisel-401-round-collar-round-shank","title":"Carltsoe Safety CS Unitec Ex310AH-32A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Pneumatic Chisel .401 round collar, round shank (310AHU-32A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-32A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-32A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-32A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-32A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.49 Lbs (0.22 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674240790819,"sku":"744261","price":93.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex310AH-32A_01_c29a6eac-fcbe-47db-983c-f0495e4c168a.jpg?v=1785006056"},{"product_id":"cs-unitec-ex310ah-32b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-pneumatic-chisel-401-round-collar-round-shank","title":"Carltsoe Safety CS Unitec Ex310AH-32B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Pneumatic Chisel .401 round collar, round shank (310AHU-32B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-32B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-32B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-32B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-32B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.49 Lbs (0.22 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674241708323,"sku":"744262","price":133.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex310AH-32B_01_2eab2aa7-abfb-4282-b00b-e372a4ae26fb.jpg?v=1785006071"},{"product_id":"cs-unitec-ex310ah-50a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-pneumatic-chisel-401-round-collar-round-shank","title":"Carltsoe Safety CS Unitec Ex310AH-50A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Pneumatic Chisel .401 round collar, round shank (310AHU-50A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-50A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-50A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-50A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-50A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.49 Lbs (0.22 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674242429219,"sku":"744263","price":103.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex310AH-50A_01_3d5ab606-8c47-4fdf-8971-824ede64ab30.jpg?v=1785006086"},{"product_id":"cs-unitec-ex310ah-50b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-pneumatic-chisel-401-round-collar-round-shank","title":"Carltsoe Safety CS Unitec Ex310AH-50B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Pneumatic Chisel .401 round collar, round shank (310AHU-50B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-50B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-50B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-50B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex310AH-50B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.49 Lbs (0.22 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674242953507,"sku":"744264","price":127.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex310AH-50B_01_38f7eb12-24f4-41f1-bc24-8fbbbb484965.jpg?v=1785006100"},{"product_id":"cs-unitec-ex312-25b-copper-beryllium-non-sparking-non-magnetic-corrosion-resistant-1-scaling-chisel","title":"Carltsoe Safety CS Unitec Ex312-25B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant 1\" Scaling Chisel (312U-25B)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex312-25B Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex312-25B Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex312-25B Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eVery durable due to high hardness and tensile strength\u003c\/li\u003e\n\u003cli\u003eNon-ferrous components; safer for applications demanding non-magnetic properties\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex312-25B Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Copper-Beryllium (CuBe)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 38\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Be\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.30 Lbs (0.14 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674243903779,"sku":"744265","price":261.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex312-25B_01_6fbeb70f-79e5-4fb8-84e0-86cc5a1fdef8.jpg?v=1785006116"},{"product_id":"cs-unitec-ex312-25a-aluminum-bronze-non-sparking-low-magnetism-corrosion-resistant-1-scaling-chisel","title":"Carltsoe Safety CS Unitec Ex312-25A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant 1\" Scaling Chisel (312U-25A)","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex312-25A Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability.\n\nWith over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications.\nNon-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI\/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical\/paper manufacturing, and shipyards.\n*Any misuse, abuse or normal service wear is not covered under this warranty.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex312-25A Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Chisel Non-Sparking\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex312-25A Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-Sparking, Non-Magnetic \u0026amp; Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones\u003c\/li\u003e\n\u003cli\u003eLifetime Warranty, ISO 9001:2015 manufactured, TUV certified\u003c\/li\u003e\n\u003cli\u003eNon-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present\u003c\/li\u003e\n\u003cli\u003eThe non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.\u003c\/li\u003e\n\u003cli\u003eThese corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.\u003c\/li\u003e\n\u003cli\u003eChisels have a cutting edge at one end for cutting,\nshaping and removing metal softer than the cutting edge itself\nsuch as cast iron, wrought iron, steel, bronze, copper, etc. and\na struck face on the opposite end.\u003c\/li\u003e\n\u003cli\u003eNot as durable as CuBe\u003c\/li\u003e\n\u003cli\u003eLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eCS Unitec Ex312-25A Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eAlloy\u003c\/td\u003e\n \u003ctd\u003e Aluminum-Bronze (AlBr)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eZone Compatibility\u003c\/td\u003e\n \u003ctd\u003e ATEX Directive 1999\/92\/EC for work in Zones 0 \/ 1 \/ 2 \/ 20 \/ 21 \/ 22 \/ M1 \/ M2\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eRockwell Hardness\u003c\/td\u003e\n \u003ctd\u003e 27\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eComposition\u003c\/td\u003e\n \u003ctd\u003e Al\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWARNING\u003c\/td\u003e\n \u003ctd\u003e This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e 0.30 Lbs (0.14 Kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Carlstoe Safety","offers":[{"title":"Default Title","offer_id":48674244493603,"sku":"744266","price":154.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/CS-Unitec-Ex312-25A_01_0d746a78-32a1-4458-98b2-9b5deac0ac83.jpg?v=1785006131"}],"url":"https:\/\/toolup.com\/collections\/cs-unitec-chisels.oembed?page=2","provider":"Toolup","version":"1.0","type":"link"}