{"title":"Makita to Exclude","description":"","products":[{"product_id":"makita-xru15z-18v-x2-36v-lxt-brushless-string-trimmer-tool-only","title":"Makita XRU15Z 18V X2 (36V) LXT Brushless String Trimmer, Tool Only","description":"\u003cdiv class=\"product-details-description\"\u003e\r\n \u003ch4 class=\"product-details-section-title\"\u003eMakita XRU15Z Description\u003c\/h4\u003e\r\n \u003cp class=\"product-details-short-description-text\"\u003e\r\n Landscapers are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line-up of cordless OPE, including the 18V X2 (36V) LXT® Brushless Cordless String Trimmer, Tool Only (model XRU15Z). With zero emissions, lower noise and considerably less maintenance than gas-powered string trimmers, the 18V X2 (36V) LXT Cordless String Trimmer is a welcome solution for landscapers. It's powered by two fast-charging 18V LXT Batteries (sold separately) for maximum power and run time, but without leaving the strongly-preferred 18V battery platform. Electronic controls efficiently use battery energy to match the changing demands of the application for increased power and speed when needed. In addition, the string trimmer rotates in the same counter-clockwise direction as professional-grade trimmers, and uses industry standard spindles (M10x1.25 LH) for added convenience. With the efficient Makita® BL™ brushless motor, the trimmer delivers longer run time, more power and speed, and longer tool life. Makita's efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools. The XRU15Z features a Makita-built Outer Rotor Brushless Motor with direct drive which provides high power and increased torque. The String Trimmer features Makita Extreme Protection Technology (XPT™). XPT is a protective seal inside the tool, and is engineered for improved operation in harsh conditions by channeling water and dust from key internal components.\r\n \u003c\/p\u003e\r\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\r\n \u003ch4 class=\"product-details-section-title\"\u003eMakita XRU15Z Includes\u003c\/h4\u003e\r\n \u003cul class=\"product-details-includes-list\"\u003e\r\n \u003cli\u003e(1) Bump \u0026amp; Feed Trimmer Head\u003c\/li\u003e\r\n \u003c\/ul\u003e\n\u003c\/div\u003e\r\n \u003cdiv class=\"product-details-features\"\u003e\r\n \u003ch4 class=\"product-details-section-title\"\u003eMakita XRU15Z Features\u003c\/h4\u003e\r\n \u003cul class=\"product-details-features-list\"\u003e\r\n \u003cli\u003eUp to 1-1\/2 hours of run time with 18V LXT® 5.0Ah batteries (batteries not included)\u003c\/li\u003e\n\u003cli\u003eMakita-built Outer Rotor BL™ Brushless Motor direct-drive system provides high power and increased torque\u003c\/li\u003e\n\u003cli\u003eAutomatic Torque Drive Technology mode automatically shifts from 3,500-6,500 RPM for extended run time or added power\u003c\/li\u003e\n\u003cli\u003e3 speed options (Low: 3,500 RPM, Medium: 5,300 RPM, High: 6,500 RPM) for power management\u003c\/li\u003e\n\u003cli\u003e15\" cutting swath for increased productivity\u003c\/li\u003e\n\u003cli\u003eIncludes bump and feed trimmer head loaded with 0.080\" twisted quiet line\u003c\/li\u003e\n\u003cli\u003eSteel drive shaft for less vibration and longer life\u003c\/li\u003e\n\u003cli\u003eReverse rotation function allows operator to quickly clear trimmer head of entangled grass and weeds\u003c\/li\u003e\n\u003cli\u003eAdjustable loop handle for operator comfort\u003c\/li\u003e\n\u003cli\u003eExtreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh job site conditions\u003c\/li\u003e\n\u003cli\u003eEquipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating\u003c\/li\u003e\n\u003cli\u003eBatteries and charger not included\u003c\/li\u003e\n\u003cli\u003e3-year limited warranty\u003c\/li\u003e\r\n \u003c\/ul\u003e\n\u003c\/div\u003e\r\n \u003cdiv class=\"product-details-specs\"\u003e\r\n \u003ch4 class=\"product-details-section-title\"\u003eMakita XRU15Z Specifications\u003c\/h4\u003e\r\n \u003ctable\u003e\r\n \u003ctr\u003e\r\n \u003ctd\u003eCutting Capacity (diameter) \u003c\/td\u003e\r\n \u003ctd\u003e 15\"\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eNo Load Speed (3 spd) \u003c\/td\u003e\r\n \u003ctd\u003e 3,500\/5,300\/6,500 RPM\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eArbor Shaft \u003c\/td\u003e\r\n \u003ctd\u003e M10 x 1.25 LH\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eOverall Length \u003c\/td\u003e\r\n \u003ctd\u003e 69-1\/4\"\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eNet Weight (without battery) \u003c\/td\u003e\r\n \u003ctd\u003e 7.6 lbs.\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eNet Weight (with battery) \u003c\/td\u003e\r\n \u003ctd\u003e 10.4 lbs.\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\r\n \u003ctd\u003e 10.81 lbs.\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eUPC Code \u003c\/td\u003e\r\n \u003ctd\u003e 088381-884297\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674037305635,"sku":"585054","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-XRU15Z_01_130894c5-c345-4a0b-8451-0bc18b92059d.jpg?v=1774621855"},{"product_id":"makita-xbu03z-18v-lxt-lithium-ion-brushless-cordless-blower-tool-only","title":"Makita XBU03Z 18V LXT Lithium-Ion Brushless Cordless Blower, Tool Only","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita XBU03Z Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n With zero emissions and lower noise, the 18V LXT® Brushless Cordless Blower (XBU03Z) is a welcome solution for clean-up applications. It’s powered by one 18V LXT battery (sold separately), the same battery that powers the full range of solutions in the expanding LXT system. This blower features a compact and ergonomic design, weighing in at only 6.5 lbs. and measuring 32-1\/2” long. \r\n\r\nWith no carbon brushes, the Makita® BL™ Brushless motor runs cooler and more efficiently for longer life, and delivers speeds up to 116 MPH air velocity and a full 459 CFM. Makita’s efficient BL™ Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools. Electronic controls efficiently use battery energy to match the changing demands of the application for increased power and speed when needed. A cruise control lever provides management of power and run time.\r\n\r\nThe XBU03Z features Makita Extreme Protection Technology (XPT™). XPT™ is a protective seal inside the tool, and is engineered for improved operation in harsh conditions by channeling water and dust from key internal components.\r\nIt’s part of Makita’s expanding 18V Lithium-Ion System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita 18V Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.\r\n\r\nFor improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita XBU03Z Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 18V LXT BL Blower, Tool Only (XBU03Z)\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita XBU03Z Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eMakita-built BL™ Brushless Motor delivers up to 459 CFM and 116 MPH\u003c\/li\u003e\n\u003cli\u003eCruise control lever with variable speed trigger for power and run time management\u003c\/li\u003e\n\u003cli\u003eSpeed lock for convenient continuous operation\u003c\/li\u003e\n\u003cli\u003eIn-line fan design provides better tool balance and improved ergonomics\u003c\/li\u003e\n\u003cli\u003eCompact design weighing only 6.5 lbs. with battery (battery not included)\u003c\/li\u003e\n\u003cli\u003eRubberized soft grip provides increased comfort on the job\u003c\/li\u003e\n\u003cli\u003eConveniently located hole on housing bottom to hang blower for easy storage\u003c\/li\u003e\n\u003cli\u003eSound pressure rating of 63 dB(A); measured per ANSI B 175.2 standard\u003c\/li\u003e\n\u003cli\u003eFeatures Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditions\u003c\/li\u003e\n\u003cli\u003eEquipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating\u003c\/li\u003e\n\u003cli\u003e3-year limited warranty\u003c\/li\u003e\n\u003cli\u003eOnly use genuine Makita batteries and chargers\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita XBU03Z Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax. Air Volume \u003c\/td\u003e\n \u003ctd\u003e 459 CFM\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMax. Air Velocity \u003c\/td\u003e\n \u003ctd\u003e 116 MPH\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eSound Pressure (per Ansi B175.2 standard) \u003c\/td\u003e\n \u003ctd\u003e 63 dB(A)\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eNet Weight (without battery) \u003c\/td\u003e\n \u003ctd\u003e 5.1 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eNet Weight (with battery) \u003c\/td\u003e\n \u003ctd\u003e 6.5 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 32-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBlower Type \u003c\/td\u003e\n \u003ctd\u003e Handheld\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBattery \u003c\/td\u003e\n \u003ctd\u003e 18V LXT® Lithium-Ion\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePower Type \u003c\/td\u003e\n \u003ctd\u003e Cordless\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 7.28 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-887694\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674206912803,"sku":"585980","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-XBU03Z_01_054e59db-5bf3-4619-9673-5efdcec23b80.jpg?v=1778158025"},{"product_id":"makita-b-69696-4-1-2-diamond-blade-turbo-general-purpose","title":"Makita B-69696 4-1\/2\" Diamond Blade, Turbo, General Purpose","description":"\u003cdiv class=\"product-details-description\"\u003e\r\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-69696 Description\u003c\/h4\u003e\r\n \u003cp class=\"product-details-short-description-text\"\u003e\r\n The Makita 4-1\/2\" Turbo Rim Diamond Blade is ideal for general purpose cutting applications including block, brick and cured concrete. The turbo rim design is engineered for constant contact with the material to deliver a smoother finish than segmented blades. Diamond blades are part of Makita's growing line-up of solutions for concrete applications.\r\n\r\n \u003c\/p\u003e\r\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\r\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-69696 Includes\u003c\/h4\u003e\r\n \u003cul class=\"product-details-includes-list\"\u003e\r\n \u003cli\u003e(1) 4-1\/2\" Turbo rim diamond blade\u003c\/li\u003e\r\n \u003c\/ul\u003e\n\u003c\/div\u003e\r\n \u003cdiv class=\"product-details-features\"\u003e\r\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-69696 Features\u003c\/h4\u003e\r\n \u003cul class=\"product-details-features-list\"\u003e\r\n \u003cli\u003e50% taller (13mm) segments are designed for longer life and faster cutting\u003c\/li\u003e\n\u003cli\u003eUp to 4x longer life than competitive blades\u003c\/li\u003e\n\u003cli\u003eFor cutting concrete, block, brick, pavers, and roof tiles\u003c\/li\u003e\n\u003cli\u003eOptimum bond matrix provides a faster, longer lasting, and smoother cutting\u003c\/li\u003e\n\u003cli\u003eUp to 30% smoother cutting than segmented blades\u003c\/li\u003e\n\u003cli\u003eCarefully tensioned for less vibration and a superior user experience\u003c\/li\u003e\n\u003cli\u003eStrict quality control measures ensure superior performance\u003c\/li\u003e\n\u003cli\u003eDry or wet cutting for added versatility\u003c\/li\u003e\n\u003cli\u003eFor smoother and finer cuts in masonry products\u003c\/li\u003e\n\u003cli\u003eMade with high quality diamonds\u003c\/li\u003e\n\u003cli\u003eFor use with angle grinders\u003c\/li\u003e\n\u003cli\u003eMax RPM 13,800\u003c\/li\u003e\r\n \u003c\/ul\u003e\n\u003c\/div\u003e\r\n \u003cdiv class=\"product-details-specs\"\u003e\r\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-69696 Specifications\u003c\/h4\u003e\r\n \u003ctable\u003e\r\n \u003ctr\u003e\r\n \u003ctd\u003eShipping Weight\u003c\/td\u003e\r\n \u003ctd\u003e 1.3 lbs.\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eUPC Code\u003c\/td\u003e\r\n \u003ctd\u003e 088381-549028\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674570440995,"sku":"589289","price":30.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-69696_01_d35d5a40-c1a5-4c3e-93d9-c0e99723daa9.jpg?v=1770905323"},{"product_id":"makita-d-70493-2-nylon-cup-brush-fine-240-grit","title":"Makita D-70493 2\" Nylon Cup Brush, Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70493 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n The Makita® 2\" Nylon Cup Brush is designed to work with driver-drills in a variety of applications. The cup brush design is ideal for flat surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70493 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 2\" Nylon Cup Brush, Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70493 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eCup brush design for preparation of flat surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70493 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .028\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Flat Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .11 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545389\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674574176547,"sku":"589510","price":14.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70493_01_103301f7-44fc-48f9-86c0-3b2638f59c1b.jpg?v=1755653304"},{"product_id":"makita-d-70502-2-1-2-nylon-cup-brush-coarse-80-grit","title":"Makita D-70502 2-1\/2\" Nylon Cup Brush, Coarse, 80 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70502 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n The Makita® 2-1\/2\" Nylon Cup Brush is designed to work with driver-drills in a variety of applications. The cup brush design is ideal for flat surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70502 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 2-1\/2\" Nylon Cup Brush, Coarse, 80 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70502 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a coarse finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eCup brush design for preparation of flat surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70502 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 2-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 80\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .05\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 5\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Flat Surfaces, Metal, Wood \u0026amp; Plastic, Coarse Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .2 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545365\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674575094051,"sku":"589512","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70502_01_bcc069f3-6228-4b41-af80-7cb985cb703a.jpg?v=1755653342"},{"product_id":"makita-d-70518-2-1-2-nylon-cup-brush-fine-240-grit","title":"Makita D-70518 2-1\/2\" Nylon Cup Brush, Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70518 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n The Makita® 2-1\/2\" Nylon Cup Brush is designed to work with driver-drills in a variety of applications. The cup brush design is ideal for flat surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70518 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 2-1\/2\" Nylon Cup Brush, Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70518 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eCup brush design for preparation of flat surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70518 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 2-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .031\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 5\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Flat Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .2 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545396\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674578075939,"sku":"589513","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70518_01_bd1ee609-474d-4df7-bd30-903477d638d8.jpg?v=1755653360"},{"product_id":"makita-d-70524-3-nylon-cup-brush-coarse-80-grit","title":"Makita D-70524 3\" Nylon Cup Brush, Coarse, 80 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70524 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n The Makita® 3\" Nylon Cup Brush is designed to work with driver-drills in a variety of applications. The cup brush design is ideal for flat surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70524 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 3\" Nylon Cup Brush, Coarse, 80 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70524 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a coarse finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eCup brush design for preparation of flat surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70524 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 3\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 80\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .049\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Flat Surfaces, Metal, Wood \u0026amp; Plastic, Coarse Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .234 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545372\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674579747107,"sku":"589514","price":15.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70524_01_3d161476-d536-4d47-ab20-de9a4f771a30.jpg?v=1755653383"},{"product_id":"makita-d-70530-3-nylon-cup-brush-fine-240-grit","title":"Makita D-70530 3\" Nylon Cup Brush, Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70530 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n The Makita® 3\" Nylon Cup Brush is designed to work with driver-drills in a variety of applications. The cup brush design is ideal for flat surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70530 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 3\" Nylon Cup Brush, Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70530 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eCup brush design for preparation of flat surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70530 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 3\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .033\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Flat Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .23 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545402\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674580795683,"sku":"589515","price":15.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70530_01_0787a9ea-813c-472d-9a98-71182ec185cd.jpg?v=1768305133"},{"product_id":"makita-d-70546-1-1-2-nylon-wheel-brush-coarse-80-grit","title":"Makita D-70546 1-1\/2\" Nylon Wheel Brush, Coarse, 80 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70546 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon Wheel Brushes are designed to work with driver-drills in a variety of applications. The wheel brush design is ideal for spot and corner surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70546 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 1-1\/2\" Nylon Wheel Brush, Coarse, 80 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70546 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a coarse finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eWheel brush design for spot and corner surface preparation\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70546 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 1-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 80\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .046\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Spot and Corner Surfaces, Metal, Wood \u0026amp; Plastic, Coarse Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .09 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545419\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674582040867,"sku":"589516","price":13.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70546_01_2067c2ef-c87f-4ab8-9b9b-a94c8cd1a553.jpg?v=1755653423"},{"product_id":"makita-d-70552-1-1-2-nylon-wheel-brush-fine-240-grit","title":"Makita D-70552 1-1\/2\" Nylon Wheel Brush, Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70552 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon Wheel Brushes are designed to work with driver-drills in a variety of applications. The wheel brush design is ideal for spot and corner surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70552 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 1-1\/2\" Nylon Wheel Brush, Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70552 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eWheel brush design for spot and corner surface preparation\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70552 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 1-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .028\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Spot and Corner Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .09 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545464\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674583154979,"sku":"589517","price":13.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70552_01_527b23c3-e4a7-4ded-8aa2-bafad7bfc70e.jpg?v=1755653444"},{"product_id":"makita-d-70568-2-nylon-wheel-brush-coarse-80-grit","title":"Makita D-70568 2\" Nylon Wheel Brush, Coarse, 80 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70568 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n The Makita® 2\" Nylon Wheel Brush is designed to work with driver-drills in a variety of applications. The wheel brush design is ideal for spot and corner surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70568 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 2\" Nylon Wheel Brush, Coarse, 80 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70568 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a coarse finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eWheel brush design for spot and corner surface preparation\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70568 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 80\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .055\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 5\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 7\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Spot and Corner Surfaces, Metal, Wood \u0026amp; Plastic, Coarse Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .1 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545426\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674583974179,"sku":"589518","price":14.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70568_01_db87b492-4ce3-4c34-ba7d-adbbc3257698.jpg?v=1755653472"},{"product_id":"makita-d-70574-2-nylon-wheel-brush-fine-240-grit","title":"Makita D-70574 2\" Nylon Wheel Brush, Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70574 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon Wheel Brush is designed to work with driver-drills in a variety of applications. The wheel brush design is ideal for spot and corner surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70574 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 2\" Nylon Wheel Brush, Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70574 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eWheel brush design for spot and corner surface preparation\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70574 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .029\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 5\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 7\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Spot and Corner Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .09 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545471\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674584170787,"sku":"589519","price":14.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70574_01_697b0b75-bb4e-47c1-a77e-86afcd1466be.jpg?v=1755653492"},{"product_id":"makita-d-70580-2-1-2-nylon-wheel-brush-coarse-80-grit","title":"Makita D-70580 2-1\/2\" Nylon Wheel Brush, Coarse, 80 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70580 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon Wheel Brushes are designed to work with driver-drills in a variety of applications. The wheel brush design is ideal for spot and corner surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70580 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 2-1\/2\" Nylon Wheel Brush, Coarse, 80 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70580 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a coarse finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eWheel brush design for spot and corner surface preparation\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70580 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 2-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 80\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .045\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 5\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Spot and Corner Surfaces, Metal, Wood \u0026amp; Plastic, Coarse Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .11 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545433\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674584695075,"sku":"589520","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70580_01_f45d172a-f706-4b51-8e24-760301c4252a.jpg?v=1777629557"},{"product_id":"makita-d-70596-2-1-2-nylon-wheel-brush-fine-240-grit","title":"Makita D-70596 2-1\/2\" Nylon Wheel Brush, Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70596 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon Wheel Brush is designed to work with driver-drills in a variety of applications. The wheel brush design is ideal for spot and corner surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70596 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 2-1\/2\" Nylon Wheel Brush, Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70596 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eWheel brush design for spot and corner surface preparation\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70596 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 2-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .034\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Spot and Corner Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .11 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545488\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674585055523,"sku":"589521","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70596_01_06b78c8c-4255-475a-8ba2-af27ec71bfc8.jpg?v=1755653527"},{"product_id":"makita-d-70605-3-nylon-wheel-brush-coarse-80-grit","title":"Makita D-70605 3\" Nylon Wheel Brush, Coarse, 80 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70605 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon Wheel Brushes are designed to work with driver-drills in a variety of applications. The wheel brush design is ideal for spot and corner surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70605 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 3\" Nylon Wheel Brush, Coarse, 80 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70605 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a coarse finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eWheel brush design for spot and corner surface preparation\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70605 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 3\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 80\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .055\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Spot and Corner Surfaces, Metal, Wood \u0026amp; Plastic, Coarse Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .2 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545440\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674585481507,"sku":"589522","price":15.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70605_01_43140b7b-9715-40a6-9255-ae0b23545e3f.jpg?v=1773829971"},{"product_id":"makita-d-70611-3-nylon-wheel-brush-fine-240-grit","title":"Makita D-70611 3\" Nylon Wheel Brush, Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70611 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon Wheel Brushes are designed to work with driver-drills in a variety of applications. The wheel brush design is ideal for spot and corner surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70611 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 3\" Nylon Wheel Brush, Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70611 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eWheel brush design for spot and corner surface preparation\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70611 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 3\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .033\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 9\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Spot and Corner Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .2 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545495\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674586923299,"sku":"589523","price":15.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70611_01_2c4a28be-3af4-4605-8bca-4f8310dfc8de.jpg?v=1755653569"},{"product_id":"makita-d-70627-4-nylon-wheel-brush-coarse-80-grit","title":"Makita D-70627 4\" Nylon Wheel Brush, Coarse, 80 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70627 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon Wheel Brushes are designed to work with driver-drills in a variety of applications. The wheel brush design is ideal for spot and corner surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70627 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 4\" Nylon Wheel Brush, Coarse, 80 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70627 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a coarse finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eWheel brush design for spot and corner surface preparation\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70627 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 80\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .055\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 7\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Spot and Corner Surfaces, Metal, Wood \u0026amp; Plastic, Coarse Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .27 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545457\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674587316515,"sku":"589524","price":16.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70627_01_c0db943b-0a60-4e1a-be51-b21647ed3b23.jpg?v=1773829989"},{"product_id":"makita-d-70633-4-nylon-wheel-brush-fine-240-grit","title":"Makita D-70633 4\" Nylon Wheel Brush, Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70633 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon Wheel Brush is designed to work with driver-drills in a variety of applications. The wheel brush design is ideal for spot and corner surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70633 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 4\" Nylon Wheel Brush, Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70633 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eWheel brush design for spot and corner surface preparation\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70633 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .03\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 3\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 7\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Spot and Corner Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .27 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545501\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674587447587,"sku":"589525","price":16.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70633_01_49449f63-1fd3-428b-a1cd-827f9a55c3a7.jpg?v=1755653621"},{"product_id":"makita-d-70649-1-2-nylon-end-brush-coarse-80-grit","title":"Makita D-70649 1\/2\" Nylon End Brush, Coarse, 80 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70649 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon End Brushes are designed to work with driver-drills for tight and narrow surface preparation on multiple materials, including metal and wood. This brush is designed for coarse finishes. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles. The brush is engineered for use at up to 4,500 RPM.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70649 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 1\/2\" Nylon End Brush, Coarse, 80 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70649 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a coarse finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eEnd brush design for preparation of tight and narrow surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70649 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 80\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .055\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 1-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Tight and Narrow Surfaces, Metal, Wood \u0026amp; Plastic, Coarse Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .04 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545518\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674587939107,"sku":"589526","price":11.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70649_01_f9d688eb-84b0-477c-ae5b-9d659ddb9356.jpg?v=1755653643"},{"product_id":"makita-d-70655-1-2-nylon-end-brush-fine-240-grit","title":"Makita D-70655 1\/2\" Nylon End Brush, Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70655 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon End Brushes are designed to work with driver-drills for tight and narrow surface preparation on multiple materials, including metal and wood. This brush is designed for use on fine finishes. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles. The brush is engineered for use at up to 4,500 RPM.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70655 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 1\/2\" Nylon End Brush, Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70655 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eEnd brush design for preparation of tight and narrow surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70655 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .032\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 1-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Tight and Narrow Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .04 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545556\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674588889379,"sku":"589527","price":11.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70655_01_1f64518a-6768-4fee-af3d-6dcb97c1ea86.jpg?v=1755653659"},{"product_id":"makita-d-70661-3-4-nylon-end-brush-coarse-80-grit","title":"Makita D-70661 3\/4\" Nylon End Brush, Coarse, 80 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70661 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon End Brushes are designed to work with driver-drills for tight and narrow surface preparation on multiple materials, including metal and wood. This brush is designed for coarse finishes. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles. The brush is engineered for use at up to 4,500 RPM.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70661 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 3\/4\" Nylon End Brush, Coarse, 80 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70661 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a coarse finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eEnd brush design for preparation of tight and narrow surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70661 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 80\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .058\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 1-3\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Tight and Narrow Surfaces, Metal, Wood \u0026amp; Plastic, Coarse Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .07 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545525\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674589151523,"sku":"589528","price":11.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70661_01_8c2c8b74-3ca3-490d-8e8c-ca91152865da.jpg?v=1755653680"},{"product_id":"makita-d-70677-3-4-nylon-end-brush-fine-240-grit","title":"Makita D-70677 3\/4\" Nylon End Brush, Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70677 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon End Brushes are designed to work with driver-drills for tight and narrow surface preparation on multiple materials, including metal and wood. This brush is designed for use on fine finishes. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles. The brush is engineered for use at up to 4,500 RPM.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70677 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 3\/4\" Nylon End Brush, Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70677 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eEnd brush design for preparation of tight and narrow surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70677 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .027\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 7\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 1-1\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Tight and Narrow Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .07 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545563\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674589675811,"sku":"589529","price":11.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70677_01_8c4399cc-7478-4251-9596-6b0f8a93183a.jpg?v=1755653701"},{"product_id":"makita-d-70683-1-nylon-end-brush-coarse-80-grit","title":"Makita D-70683 1\" Nylon End Brush, Coarse, 80 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70683 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon End Brushes are designed to work with driver-drills for tight and narrow surface preparation on multiple materials, including metal and wood. This brush is designed for coarse finish on metal or wood. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles. The brush is engineered for use at up to 4,500 RPM.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70683 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 1\" Nylon End Brush, Coarse, 80 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70683 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a coarse finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eEnd brush design for preparation of tight and narrow surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70683 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 80\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .052\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 1-1\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Tight and Narrow Surfaces, Metal, Wood \u0026amp; Plastic, Coarse Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .09 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545532\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674590560547,"sku":"589530","price":12.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70683_01_32031ec2-473e-469a-91db-0064110c322b.jpg?v=1755653924"},{"product_id":"makita-d-70699-1-nylon-end-brush-fine-240-grit","title":"Makita D-70699 1\" Nylon End Brush, Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70699 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon End Brushes are designed to work with driver-drills for tight and narrow surface preparation on multiple materials, including metal and wood. This brush is designed for use on fine finishes. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles. The brush is engineered for use at up to 4,500 RPM.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70699 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 1\" Nylon End Brush, Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70699 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eEnd brush design for preparation of tight and narrow surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70699 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .03\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 1-1\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Tight and Narrow Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .09 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545570\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674590822691,"sku":"589531","price":12.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70699_01_0cd5c5f2-9f05-4ccc-8519-cd223909a3dd.jpg?v=1755653951"},{"product_id":"makita-d-70714-1-1-4-nylon-end-brush-fine-240-grit","title":"Makita D-70714 1-1\/4\" Nylon End Brush, Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70714 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon End Brushes are designed to work with driver-drills for tight and narrow surface preparation on multiple materials, including metal and wood. This brush is designed for use on fine finishes. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles. The brush is engineered for use at up to 4,500 RPM.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70714 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 1-1\/4\" Nylon End Brush, Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70714 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eEnd brush design for preparation of tight and narrow surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70714 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 1-1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .032\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 1-1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Tight and Narrow Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .11 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545587\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674592166179,"sku":"589532","price":16.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70714_01_4cc232cc-9406-40aa-b2cb-b9bd774b8962.jpg?v=1755653968"},{"product_id":"makita-d-70708-1-1-4-nylon-end-brush-coarse-80-grit","title":"Makita D-70708 1-1\/4\" Nylon End Brush, Coarse, 80 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70708 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon End Brushes are designed to work with driver-drills for tight and narrow surface preparation on multiple materials, including metal and wood. This brush is designed for coarse finishes. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles. The brush is engineered for use at up to 4,500 RPM.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70708 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 1-1\/4\" Nylon End Brush, Coarse, 80 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70708 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a coarse finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eEnd brush design for preparation of tight and narrow surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70708 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 1-1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 80\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .055\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 1-1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Tight and Narrow Surfaces, Metal, Wood \u0026amp; Plastic, Coarse Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .11 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545549\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674592461091,"sku":"589533","price":12.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70708_01_720eaed9-1440-4dee-bcf8-95d7f38e0143.jpg?v=1755653989"},{"product_id":"makita-d-70736-4-nylon-flap-brush-fine-240-grit","title":"Makita D-70736 4\" Nylon Flap Brush,Fine, 240 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70736 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon Flap Brushes are designed to work with driver-drills in a variety of applications. The flap brush design is ideal for wide surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70736 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 4\" Nylon Flap Brush,Fine, 240 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70736 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a fine finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eFlap brush design for preparation of wide surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70736 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 240\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .025\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 7\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 1-1\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Wide Surfaces, Metal, Wood \u0026amp; Plastic, Fine Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .22 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545600\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674593476899,"sku":"589534","price":16.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70736_01_00e4f8d8-ef95-4ca5-8a62-c0beec017f91.jpg?v=1755654009"},{"product_id":"makita-d-70720-4-nylon-flap-brush-coarse-80-grit","title":"Makita D-70720 4\" Nylon Flap Brush, Coarse, 80 Grit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70720 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita® Nylon Flap Brushes are designed to work with driver-drills in a variety of applications. The flap brush design is ideal for wide surface preparation on multiple materials, including metal and wood. The brush is engineered for use at up to 4,500 RPM. Durable nylon construction makes for long life because nylon maintains its shape, does not rust, does not spark, and does not shed metal bristles.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70720 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 4\" Nylon Flap Brush, Coarse, 80 Grit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70720 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal use is for surface preparation on metal and wood utilizing a drill\u003c\/li\u003e\n\u003cli\u003eFor a coarse finish on metal or wood\u003c\/li\u003e\n\u003cli\u003eNylon brushes maintain shape, don't rust, don't spark and don't shed metal bristles\u003c\/li\u003e\n\u003cli\u003eFlap brush design for preparation of wide surfaces\u003c\/li\u003e\n\u003cli\u003eMax RPM 4500\u003c\/li\u003e\n\u003cli\u003eFor use in a Driver-Drill\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita D-70720 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eGrit \u003c\/td\u003e\n \u003ctd\u003e 80\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShank Type \u003c\/td\u003e\n \u003ctd\u003e 1\/4\" Straight\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eMaximum Speed (RPM) \u003c\/td\u003e\n \u003ctd\u003e 4,500\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Material \u003c\/td\u003e\n \u003ctd\u003e Nylon\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Diameter \u003c\/td\u003e\n \u003ctd\u003e .05\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eFace Width \u003c\/td\u003e\n \u003ctd\u003e 7\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eBristle Length \u003c\/td\u003e\n \u003ctd\u003e 1\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eApplication (nylon brushes) \u003c\/td\u003e\n \u003ctd\u003e Wide Surfaces, Metal, Wood \u0026amp; Plastic, Coarse Finish\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .23 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-545594\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674594427171,"sku":"589535","price":16.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-D-70720_01.jpg?v=1755654038"},{"product_id":"makita-dml811-18v-lxt®-lithium-ion-cordless-corded-work-light-light-only","title":"Makita DML811 18V LXT® Lithium-Ion Cordless\/Corded Work Light, Light Only","description":"\u003cdiv class=\"product-details-description\"\u003e\r\n \u003ch4 class=\"product-details-section-title\"\u003eMakita DML811 Description\u003c\/h4\u003e\r\n \u003cp class=\"product-details-short-description-text\"\u003e\r\n The 18V LXT® Lithium-Ion Cordless\/Corded Work Light (DML811) offers the convenience of cordless or corded operation, and provides bright and even illumination for work spaces. At full brightness it provides 3,000 lumens of light, and 750 lumens on low mode. Adjusting knobs enable the user to direct the light to the desired angle. The Work Light can be mounted on an optional tripod stand (sold separately). Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions. \r\n\r\nIt’s part of Makita’s expanding 18V LXT System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT® Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. The fast-charging 18V LXT Lithium-Ion 5.0Ah Battery (sold separately) delivers 11 hours of continuous illumination on the low setting.\r\n \u003c\/p\u003e\r\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\r\n \u003ch4 class=\"product-details-section-title\"\u003eMakita DML811 Includes\u003c\/h4\u003e\r\n \u003cul class=\"product-details-includes-list\"\u003e\r\n \u003cli\u003e(1) 18V LXT® Lithium-Ion Cordless\/Corded Work Light\u003c\/li\u003e\n\u003cli\u003e(1) AC Power cord, DML811 (GM00002124)\u003c\/li\u003e\r\n \u003c\/ul\u003e\n\u003c\/div\u003e\r\n \u003cdiv class=\"product-details-features\"\u003e\r\n \u003ch4 class=\"product-details-section-title\"\u003eMakita DML811 Features\u003c\/h4\u003e\r\n \u003cul class=\"product-details-features-list\"\u003e\r\n \u003cli\u003e3-mode operation: delivers 3,000 lumens on High, 1,500 lumens on medium, and 750 lumens on Low\u003c\/li\u003e\n\u003cli\u003eUp to 3 hours of continuous illumination with a 6.0Ah 18V LXT® battery on high (battery and charger not included)\u003c\/li\u003e\n\u003cli\u003eUp to 13 hours of continuous illumination with a 6.0Ah 18V LXT® battery on low (battery and charger not included)\u003c\/li\u003e\n\u003cli\u003eDust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions\u003c\/li\u003e\n\u003cli\u003eL.E.D. lights effectively illuminate work area without the high heat of halogens\u003c\/li\u003e\n\u003cli\u003eAdjusting knobs enable the user to direct the flood light to desired angle\u003c\/li\u003e\n\u003cli\u003eBattery or corded operation; compatible with 18V LXT® batteries (battery not included)\u003c\/li\u003e\n\u003cli\u003eBack up power is provided by an 18V LXT® battery and keeps the flood light on if AC power is lost (charged battery must be installed)\u003c\/li\u003e\n\u003cli\u003eIncluded AC cord can easily be stored with built in cord storage\u003c\/li\u003e\n\u003cli\u003eConvenient carrying handle folds down for convenience\u003c\/li\u003e\n\u003cli\u003eCompact design at only 10-5\/8\" high\u003c\/li\u003e\n\u003cli\u003eWeighs only 10.6 lbs. with BL1850B battery (battery not included)\u003c\/li\u003e\n\u003cli\u003eWork light can be mounted on optional tripod light stand individually or with two work lights (tripod light stand not included)\u003c\/li\u003e\n\u003cli\u003e3-year limited warranty\u003c\/li\u003e\n\u003cli\u003eBattery and charger sold separately\u003c\/li\u003e\n\u003cli\u003eOnly use genuine Makita batteries and chargers\u003c\/li\u003e\r\n \u003c\/ul\u003e\n\u003c\/div\u003e\r\n \u003cdiv class=\"product-details-specs\"\u003e\r\n \u003ch4 class=\"product-details-section-title\"\u003eMakita DML811 Specifications\u003c\/h4\u003e\r\n \u003ctable\u003e\r\n \u003ctr\u003e\r\n \u003ctd\u003eVoltage \u003c\/td\u003e\r\n \u003ctd\u003e 18V\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eBattery \u003c\/td\u003e\r\n \u003ctd\u003e 18V LXT® Lithium-Ion\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eCordless\/Corded \u003c\/td\u003e\r\n \u003ctd\u003e Corded and Cordless Operation\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eAC Adapter Included \u003c\/td\u003e\r\n \u003ctd\u003e Yes\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eLumens (high\/med\/low) \u003c\/td\u003e\r\n \u003ctd\u003e 3,000 \/ 1,500 \/ 750 lm\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eRun Time (high\/med\/low) \u003c\/td\u003e\r\n \u003ctd\u003e 3 \/ 7 \/ 13 hrs\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eContinuous Use (max, in hours) \u003c\/td\u003e\r\n \u003ctd\u003e 13 hr.\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eDimensions (LxWxH) \u003c\/td\u003e\r\n \u003ctd\u003e 9-3\/4\" x 11-7\/8\" x 14-1\/4\"\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eFolded Dimensions (LxWxH) \u003c\/td\u003e\r\n \u003ctd\u003e 9-3\/4\" x 11-7\/8\" x 10-5\/8\"\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eNet Weight (with battery, sold separately) \u003c\/td\u003e\r\n \u003ctd\u003e 10.4 lbs.\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eAdapts to tripod \u003c\/td\u003e\r\n \u003ctd\u003e Yes\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eShelf Pack Qty \u003c\/td\u003e\r\n \u003ctd\u003e\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\r\n \u003ctd\u003e 9.37 lbs.\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \r\n \u003ctr\u003e\r\n \u003ctd\u003eUPC Code \u003c\/td\u003e\r\n \u003ctd\u003e 088381-888271\u003c\/td\u003e\r\n \u003c\/tr\u003e\r\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674595311907,"sku":"589536","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-DML811_02_553b94a0-52fd-4ec5-81eb-ea5557cb9dfc.jpg?v=1755654088"},{"product_id":"makita-191a51-1-1-4-square-drive-anvil-adapter-rw01","title":"Makita 191A51-1 1\/4\" Square Drive Anvil Adapter, RW01","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 191A51-1 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n The 1\/4\" Sq. Drive Anvil Adapter (191A51-1) installs quickly and easily into Makita’s 12V max CXT® Lithium-Ion Cordless 3\/8\" \/ 1\/4\" Sq. Drive Ratchet (RW01, sold separately. When used with the RW01 and socket (sold separately), it is an efficient solution for loosening nuts and taking the nut off the bolt. It is made of high-quality materials for long life.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 191A51-1 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 1\/4\" Square Drive Anvil Adapter, RW01\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 191A51-1 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eAnvil can be easily changed for added user convenience\u003c\/li\u003e\n\u003cli\u003eInstalls quickly and easily\u003c\/li\u003e\n\u003cli\u003eDesigned with high quality materials for long life\u003c\/li\u003e\n\u003cli\u003eFor use with Makita Ratchet model RW01\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 191A51-1 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-546737\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .72 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674633093411,"sku":"590429","price":25.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-191A51-1_01_8028e5be-763e-40bc-91ad-9ce8a297c82a.jpg?v=1755654565"},{"product_id":"makita-191a50-3-3-8-square-drive-anvil-adapter-rw01","title":"Makita 191A50-3 3\/8\" Square Drive Anvil Adapter, RW01","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 191A50-3 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n The 3\/8\" Sq. Drive Anvil Adapter (191A50-3) installs quickly and easily into Makita’s 12V max CXT® Lithium-Ion Cordless 3\/8\" \/ 1\/4\" Sq. Drive Ratchet (RW01, sold separately). When used with the RW01 and socket (sold separately), it is an efficient solution for loosening nuts and taking the nut off the bolt. It is made of high-quality materials for long life.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 191A50-3 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 3\/8\" Square Drive Anvil Adapter, RW01\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 191A50-3 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eAnvil can be easily changed for added user convenience\u003c\/li\u003e\n\u003cli\u003eInstalls quickly and easily\u003c\/li\u003e\n\u003cli\u003eDesigned with high quality materials for long life\u003c\/li\u003e\n\u003cli\u003eFor use with Makita Ratchet model RW01\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 191A50-3 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-546744\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .24 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674633683235,"sku":"590430","price":26.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-191A50-3_01.jpg?v=1771589854"},{"product_id":"makita-195267-4-shear-blade-assembly-set","title":"Makita 195267-4 Shear Blade Assembly Set","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 195267-4 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n The Makita® Shear Blade Assembly Set features non-electrolyzed nickel-plated blades that provide dual-action cuts. The dual-action cuts provide a shearing effect for improved results. The 6-5\/16” cutting width is designed for optimum performance. For use with Makita® 18V LXT® Grass Shear (XMU04, sold separately) and 12V max CXT® Grass Shear (MU04, sold separately). The Shear Blade Assembly Set is made of high quality materials for added durability and long life.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 195267-4 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Shear Blade Assembly Set\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 195267-4 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eNon-electrolyzed nickel plated blades engineered to resist staining and rusting\u003c\/li\u003e\n\u003cli\u003e6-5\/16\" cutting width for optimum performance\u003c\/li\u003e\n\u003cli\u003eDual blade action cuts provide a shearing effect for improved results\u003c\/li\u003e\n\u003cli\u003eFor use with Makita 18V LXT® Grass Shear model XMU04 and 12V max CXT® Grass Shear model MU04\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 195267-4 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-362375\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .65 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674635026723,"sku":"590433","price":56.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-195267-4_01_1dcd9faf-4525-4de4-bf34-ec9d243b31c8.jpg?v=1755654588"},{"product_id":"makita-198401-5-clipping-collector","title":"Makita 198401-5 Clipping Collector","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 198401-5 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Collect clips efficiently with 8” Hedge Trimmer Blade (198408-1, sold separately) on the Makita® 18V LXT Grass Shear (XMU04, sold separately). The Clipping Collector catches leaves clipped by the cutting of the 8” hedge trimmer blade for quick cleanups. The Clipping Collector is made of quality materials for long life. It installs quickly and easily for added user convenience.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 198401-5 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) Clipping Collector\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 198401-5 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eFor use with Makita 18V LXT® Grass Shear model XMU04 with optional 8' Hedge Trimmer Blade Assembly installed (part no. 198408-1)\u003c\/li\u003e\n\u003cli\u003eCatches leaves clipped by the cutting edge\u003c\/li\u003e\n\u003cli\u003eFor efficient collection and clean up of clippings\u003c\/li\u003e\n\u003cli\u003eQuick and easy to install\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 198401-5 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-483728\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .72 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674635813155,"sku":"590434","price":8.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-198401-5_01.jpg?v=1755654601"},{"product_id":"makita-198408-1-8-hedge-trimmer-blade-assembly","title":"Makita 198408-1 8\" Hedge Trimmer Blade Assembly","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 198408-1 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Convert your grass shears into a hedge trimmer with the 8” Hedge Trimmer Blade (198408-1, sold separately). The 8” Hedge Trimmer Blade is double-sided for dual cutting action. It features non-electrolyzed nickel-plated blades that are engineered to resist staining and rusting. For use with Makita® 18V LXT Grass Shear, model XMU04 (sold separately). It installs quickly and easily for added user convenience.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 198408-1 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 8\" Hedge Trimmer Blade Assembly\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 198408-1 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eConverts Makita 18V LXT® Grass Shear Model XMU04 into a Hedge Trimmer\u003c\/li\u003e\n\u003cli\u003e8\" blade for precision cutting\u003c\/li\u003e\n\u003cli\u003eNon-electrolyzed nickel plated blades engineered to resist staining and rusting\u003c\/li\u003e\n\u003cli\u003eDouble-sided for efficient dual cutting action\u003c\/li\u003e\n\u003cli\u003eQuick and easy to install\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita 198408-1 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-483766\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .8 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674636730659,"sku":"590435","price":30.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-198408-1_01_e60725e9-a666-437d-9f90-8d2af5e32e95.jpg?v=1762343290"},{"product_id":"makita-b-49373-75-pc-metric-drill-and-screw-bit-set","title":"Makita B-49373 75 Pc. Metric Drill and Screw Bit Set","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-49373 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Get one convenient set of bits and sockets for drilling, driving and fastening in one convenient carrying case with the Makita 75-Piece Metric Drill and Screw Bit Set (B-49373). The Set includes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications. Fastening applications are covered with an assortment of Phillips, Pozidriv®, Torx®, Slotted and Hex insert bits. The set also includes Titanium nitride coated high-speed steel (HSS-TIN) metal and wood drill bits, brad point wood drill bits, and masonry hammer drill bits with straight shank for use with most 3\/8\" and ½\" drills. The kit also includes a center punch, ¼\" hex countersink, ¼\" hex nutdrivers, and a ¼\" hex magnetic bit holder.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-49373 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(5) Phillips Insert Bits\u003c\/li\u003e\n\u003cli\u003e(5) Pozidriv® Insert Bits\u003c\/li\u003e\n\u003cli\u003e(5) Torx® Bits\u003c\/li\u003e\n\u003cli\u003e(5) Slotted Insert Bits\u003c\/li\u003e\n\u003cli\u003e(3) Phillips Power Bits \u003c\/li\u003e\n\u003cli\u003e(3) Pozidriv® Power Bits\u003c\/li\u003e\n\u003cli\u003e(4) Torx® Power Bits\u003c\/li\u003e\n\u003cli\u003e(2) Slotted Power Bits\u003c\/li\u003e\n\u003cli\u003e(4) Hex Power Bits\u003c\/li\u003e\n\u003cli\u003e(19) Titanium nitride coated high speed steel (HSS-TIN) metal and wood drill bits with size range of (1 - 8mm)\u003c\/li\u003e\n\u003cli\u003e(4) Brad point wood drill bits with size range of (4 - 8mm)\u003c\/li\u003e\n\u003cli\u003e(5) Masonry hammer drill bits with size range of (4 - 8mm)\u003c\/li\u003e\n\u003cli\u003e(1) Center punch for easier hole starting in metal\u003c\/li\u003e\n\u003cli\u003e(1) 1\/4\" hex countersink which produces clean finishes in hard and soft wood\u003c\/li\u003e\n\u003cli\u003e(8) 1\/4\" hex nutdrivers with size range of (5 - 11mm)\u003c\/li\u003e\n\u003cli\u003e(1) 1\/4\" hex magnetic bit holder\u003c\/li\u003e\n\u003cli\u003e(1) Convenient storage case\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-49373 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIncludes bits for drilling into metal, wood and masonry materials as well as insert and power bits for fastening applications\u003c\/li\u003e\n\u003cli\u003eIncludes (5) Phillips, (5) Pozidriv®, (5) Torx® and (5) Slotted Insert Bits\u003c\/li\u003e\n\u003cli\u003eIncludes (3) Phillips, (3) Pozidriv®, (4) Torx®, (2) Slotted, and (4) Hex Power Bits\u003c\/li\u003e\n\u003cli\u003eIncludes (19) Titanium nitride coated high speed steel (HSS-TIN) metal and wood drill bits with size range of (1 - 8mm)\u003c\/li\u003e\n\u003cli\u003eIncludes (4) brad point wood drill bits with size range of (4 - 8mm)\u003c\/li\u003e\n\u003cli\u003eIncludes (5) masonry hammer drill bits with size range of (4 - 8mm)\u003c\/li\u003e\n\u003cli\u003eStraight shank drill bits fit most corded and cordless 3\/8\" and 1\/2\" drills\u003c\/li\u003e\n\u003cli\u003eIncludes (1) center punch for easier hole starting in metal\u003c\/li\u003e\n\u003cli\u003eIncludes (1) 1\/4\" hex countersink which produces clean finishes in hard and soft wood\u003c\/li\u003e\n\u003cli\u003eIncludes (8) 1\/4\" hex nutdrivers with size range of (5 - 11mm)\u003c\/li\u003e\n\u003cli\u003eIncludes (1) 1\/4\" hex magnetic bit holder\u003c\/li\u003e\n\u003cli\u003eIncludes convenient storage case\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-49373 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-464772\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 2.668 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674636992803,"sku":"590436","price":41.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-49373_01_a2caaf38-4a90-4107-a858-93e188953507.jpg?v=1756204872"},{"product_id":"makita-b-66307-2-1-2-x-24-sds-max-tunnel-bit","title":"Makita B-66307 2-1\/2\" x 24\" SDS-MAX Tunnel Bit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66307 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n The 2-1\/2\" x 24\" SDS-MAX Tunnel Bit is designed to drill larger holes in masonry for piping, ventilation, and electrical installations. This bit is ideal for drilling holes in concrete, block, and brick where the depth of the hole exceeds the depth of a standard core bit. The B-66307 features a solid tungsten carbide head, a carbide-tipped centering point for more accurate drilling, and a solid one piece system that transfers power directly to the end of the bit. A two flute design provides faster clearance of debris.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66307 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 2-1\/2\" x 24\" SDS-MAX Tunnel Bit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66307 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal for drilling large holes in masonry where the depth of the hole exceeds the depth of a standard core bit\u003c\/li\u003e\n\u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n\u003cli\u003eTwo flute design for faster clearance of debris\u003c\/li\u003e\n\u003cli\u003eSolid one piece system transfers power directly to the end of the bit\u003c\/li\u003e\n\u003cli\u003eAsymmetrical tungsten carbide teeth for faster drilling and longer life\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped centering point helps reduce bit walking for more accurate drilling\u003c\/li\u003e\n\u003cli\u003eLarger diameters than standard carbide bits which allow smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003eFor making through-holes in masonry for piping, ventilation and electrical installations\u003c\/li\u003e\n\u003cli\u003eFor use in concrete, block and brick\u003c\/li\u003e\n\u003cli\u003e24\" overall length; 18\" usable length\u003c\/li\u003e\n\u003cli\u003eFor use in rotary hammers that accept SDS-MAX bits\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66307 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 2-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUsable Length \u003c\/td\u003e\n \u003ctd\u003e 18\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 24\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 5.01 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539166\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674637320483,"sku":"590437","price":417.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66307_01_9589271e-27d9-44f5-8559-f2f6a9ca9770.jpg?v=1755654643"},{"product_id":"makita-b-66298-2-1-8-x-24-sds-max-tunnel-bit","title":"Makita B-66298 2-1\/8\" x 24\" SDS-MAX Tunnel Bit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66298 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita’s 2-1\/8\" x 24\" SDS-MAX Tunnel Bit is designed to drill larger holes in masonry for piping, ventilation, and electrical installations. This bit is ideal for drilling holes in concrete, block, and brick where the depth of the hole exceeds the depth of a standard core bit. The B-66298 features a solid tungsten carbide head, a carbide-tipped centering point for more accurate drilling, and a solid one piece system that transfers power directly to the end of the bit. A two flute design provides faster clearance of debris.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66298 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 2-1\/8\" x 24\" SDS-MAX Tunnel Bit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66298 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal for drilling large holes in masonry where the depth of the hole exceeds the depth of a standard core bit\u003c\/li\u003e\n\u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n\u003cli\u003eTwo flute design for faster clearance of debris\u003c\/li\u003e\n\u003cli\u003eSolid one piece system transfers power directly to the end of the bit\u003c\/li\u003e\n\u003cli\u003eAsymmetrical tungsten carbide teeth for faster drilling and longer life\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped centering point helps reduce bit walking for more accurate drilling\u003c\/li\u003e\n\u003cli\u003eLarger diameters than standard carbide bits which allow smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003eFor making through-holes in masonry for piping, ventilation and electrical installations\u003c\/li\u003e\n\u003cli\u003eFor use in concrete, block and brick\u003c\/li\u003e\n\u003cli\u003e24\" overall length; 18\" usable length\u003c\/li\u003e\n\u003cli\u003eFor use in rotary hammers that accept SDS-MAX bits\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66298 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 2-1\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUsable Length \u003c\/td\u003e\n \u003ctd\u003e 18\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 24\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 4.28 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539159\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674637386019,"sku":"590438","price":374.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66298_01_3688bb57-d65d-4f65-9067-8ac9e4938d9a.jpg?v=1755654655"},{"product_id":"makita-b-66313-3-1-8-x-24-sds-max-tunnel-bit","title":"Makita B-66313 3-1\/8\" x 24\" SDS-MAX Tunnel Bit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66313 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita’s 3-1\/8\" x 24\" SDS-MAX Tunnel Bit is designed to drill larger holes in masonry for piping, ventilation, and electrical installations. This bit is ideal for drilling holes in concrete, block, and brick where the depth of the hole exceeds the depth of a standard core bit. The B-66313 features a solid tungsten carbide head, a carbide-tipped centering point for more accurate drilling, and a solid one piece system that transfers power directly to the end of the bit. A two flute design provides faster clearance of debris.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66313 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 3-1\/8\" x 24\" SDS-MAX Tunnel Bit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66313 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eIdeal for drilling large holes in masonry where the depth of the hole exceeds the depth of a standard core bit\u003c\/li\u003e\n\u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n\u003cli\u003eTwo flute design for faster clearance of debris\u003c\/li\u003e\n\u003cli\u003eSolid one piece system transfers power directly to the end of the bit\u003c\/li\u003e\n\u003cli\u003eAsymmetrical tungsten carbide teeth for faster drilling and longer life\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped centering point helps reduce bit walking for more accurate drilling\u003c\/li\u003e\n\u003cli\u003eLarger diameters than standard carbide bits which allow smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003eFor making through-holes in masonry for piping, ventilation and electrical installations\u003c\/li\u003e\n\u003cli\u003eFor use in concrete, block and brick\u003c\/li\u003e\n\u003cli\u003e24\" overall length; 18\" usable length\u003c\/li\u003e\n\u003cli\u003eFor use in rotary hammers that accept SDS-MAX bits\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66313 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 3-1\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUsable Length \u003c\/td\u003e\n \u003ctd\u003e 18\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 24\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 5.8 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539173\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674637582627,"sku":"590439","price":526.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66313_01_0d602214-a0d5-4a8a-b700-4d3b5b3799c4.jpg?v=1755654667"},{"product_id":"makita-b-66597-9-spline-rotary-hammer-core-bit-shank-adapter","title":"Makita B-66597 9\" Spline Rotary Hammer Core Bit Shank Adapter","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66597 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita Spline Core Bits are part of a 2-piece core bit system that increases versatility and productivity. Core bits have larger diameters than standard carbide bits, allowing smaller hammers to drill larger holes. The bits are for use drilling in non-reinforced concrete, block and brick.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66597 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 9\" Spline Rotary Hammer Core Bit Shank Adapter\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66597 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eSpline Shank for 2 piece core bit system for increased versatility and productivity\u003c\/li\u003e\n\u003cli\u003eFits Makita 2 piece rotary hammer core bits sizes 1-3\/4\" - 6\"\u003c\/li\u003e\n\u003cli\u003eCore bits have larger diameters than standard carbide bits allowing smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003eFor use with rotary hammers that accept Spline shank bits\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66597 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 9\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .99 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539500\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674638074147,"sku":"590440","price":111.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66597_01_e65a43ce-7d24-4caf-a415-da3a30492649.jpg?v=1755654678"},{"product_id":"makita-b-66606-16-1-2-spline-rotary-hammer-core-bit-shank-adapter","title":"Makita B-66606 16-1\/2\" Spline Rotary Hammer Core Bit Shank Adapter","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66606 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita Spline Core Bits are part of a 2-piece core bit system that increases versatility and productivity. Core bits have larger diameters than standard carbide bits, allowing smaller hammers to drill larger holes. The bits are for use drilling in non-reinforced concrete, block and brick.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66606 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 16-1\/2\" Spline Rotary Hammer Core Bit Shank Adapter\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66606 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eSpline Shank for 2 piece core bit system for increased versatility and productivity\u003c\/li\u003e\n\u003cli\u003eFits Makita 2 piece rotary hammer core bits sizes 1-3\/4\" - 6\"\u003c\/li\u003e\n\u003cli\u003eCore bits have larger diameters than standard carbide bits allowing smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003eFor use with rotary hammers that accept Spline shank bits\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66606 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 16-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 2.32 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539517\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674638467363,"sku":"590441","price":133.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66606_01_44e41a2f-85a7-4684-9975-231c33b45091.jpg?v=1755654691"},{"product_id":"makita-b-66612-9-sds-max-rotary-hammer-core-bit-shank-adapter","title":"Makita B-66612 9\" SDS-MAX Rotary Hammer Core Bit Shank Adapter","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66612 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita SDS-MAX Core Bits are part of a 2-piece core bit system that increases versatility and productivity. Core bits have larger diameters than standard carbide bits, allowing smaller hammers to drill larger holes.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66612 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 9\" SDS-MAX Rotary Hammer Core Bit Shank Adapter\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66612 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eSDS-MAX Shank for 2 piece core bit system for increased versatility and productivity\u003c\/li\u003e\n\u003cli\u003eFits Makita 2 piece rotary hammer core bits sizes 1-3\/4\" - 6\"\u003c\/li\u003e\n\u003cli\u003eCore bits have larger diameters than standard carbide bits allowing smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003eFor use with rotary hammers that accept SDS-MAX shank bits\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66612 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 9\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .99 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539524\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674638926115,"sku":"590442","price":100.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66612_01_650beadc-0c5f-4b84-855c-147c55da5647.jpg?v=1755654702"},{"product_id":"makita-b-66634-1-3-4-rotary-hammer-core-bit","title":"Makita B-66634 1-3\/4\" Rotary Hammer Core Bit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66634 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita Rotary Hammer Core Bits feature asymmetrical tungsten carbide teeth for faster drilling and longer life. Bit is part of a 2-piece core bit system that increases versatility and productivity. Core bits have larger diameters than standard carbide bits, allowing smaller hammers to drill larger holes. The bits are for dry drilling in concrete, block, and brick, and are ideal for drilling larger holes in masonry for piping, ventilation, and electrical installations. For increased versatility, the bit is interchangeable with Makita SDS-MAX or Spline rotary hammer carbide core bit shank adaptors (sold separately).\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66634 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 1-3\/4\" Rotary Hammer Core Bit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66634 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eCore bit for 2 piece bit system for increased versatility and productivity\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Makita SDS-MAX or Spline Rotary Hammer Core Bit Shank Adapters\u003c\/li\u003e\n\u003cli\u003eAsymmetrical tungsten carbide teeth for faster drilling and longer life\u003c\/li\u003e\n\u003cli\u003eFor making through-holes in masonry for piping, ventilation and electrical installations\u003c\/li\u003e\n\u003cli\u003eCore bits have larger diameters than standard carbide bits allowing smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003e4\" overall length\/3\" usable length\u003c\/li\u003e\n\u003cli\u003eFor drilling in concrete, block and brick\u003c\/li\u003e\n\u003cli\u003eFor dry drilling only\u003c\/li\u003e\n\u003cli\u003eFor use with rotary hammers\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66634 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 1-3\/4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUsable Length \u003c\/td\u003e\n \u003ctd\u003e 3\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .97 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539548\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674639221027,"sku":"590443","price":141.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66634_01_1694f171-842e-46e9-b166-dfb500e87c6a.jpg?v=1755654716"},{"product_id":"makita-b-66628-16-1-2-sds-max-rotary-hammer-core-bit-shank-adapter","title":"Makita B-66628 16-1\/2\" SDS-MAX Rotary Hammer Core Bit Shank Adapter","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66628 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita SDS-MAX Core Bits are part of a 2-piece core bit system that increases versatility and productivity. Core bits have larger diameters than standard carbide bits, allowing smaller hammers to drill larger holes.\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66628 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 16-1\/2\" SDS-MAX Rotary Hammer Core Bit Shank Adapter\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66628 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eSDS-MAX Shank for 2 piece core bit system for increased versatility and productivity\u003c\/li\u003e\n\u003cli\u003eFits Makita 2 piece rotary hammer core bits sizes 1-3\/4\" - 6\"\u003c\/li\u003e\n\u003cli\u003eCore bits have larger diameters than standard carbide bits allowing smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003eFor use with rotary hammers that accept SDS-MAX shank bits\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66628 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 16-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 2.28 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539531\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674639581475,"sku":"590444","price":120.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66628_01_593636e1-22c0-4ae7-b38e-b8298fd7dd03.jpg?v=1755654725"},{"product_id":"makita-b-66640-2-rotary-hammer-core-bit","title":"Makita B-66640 2\" Rotary Hammer Core Bit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66640 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita Rotary Hammer Core Bits feature asymmetrical tungsten carbide teeth for faster drilling and longer life. Bit is part of a 2-piece core bit system that increases versatility and productivity. Core bits have larger diameters than standard carbide bits, allowing smaller hammers to drill larger holes. The bits are for dry drilling in concrete, block, and brick, and are ideal for drilling larger holes in masonry for piping, ventilation, and electrical installations. For increased versatility, the bit is interchangeable with Makita SDS-MAX or Spline rotary hammer carbide core bit shank adaptors (sold separately).\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66640 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 2\" Rotary Hammer Core Bit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66640 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eCore bit for 2 piece bit system for increased versatility and productivity\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Makita SDS-MAX or Spline Rotary Hammer Core Bit Shank Adapters\u003c\/li\u003e\n\u003cli\u003eAsymmetrical tungsten carbide teeth for faster drilling and longer life\u003c\/li\u003e\n\u003cli\u003eFor making through-holes in masonry for piping, ventilation and electrical installations\u003c\/li\u003e\n\u003cli\u003eCore bits have larger diameters than standard carbide bits allowing smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003e4\" overall length\/3\" usable length\u003c\/li\u003e\n\u003cli\u003eFor drilling in concrete, block and brick\u003c\/li\u003e\n\u003cli\u003eFor dry drilling only\u003c\/li\u003e\n\u003cli\u003eFor use with rotary hammers\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66640 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUsable Length \u003c\/td\u003e\n \u003ctd\u003e 3\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 1.08 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539555\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674639909155,"sku":"590445","price":168.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66640_01_946aa692-8c89-45a0-8aef-8ec074ca546a.jpg?v=1755654736"},{"product_id":"makita-b-66656-2-5-8-rotary-hammer-core-bit","title":"Makita B-66656 2-5\/8\" Rotary Hammer Core Bit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66656 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita Rotary Hammer Core Bits feature asymmetrical tungsten carbide teeth for faster drilling and longer life. Bit is part of a 2-piece core bit system that increases versatility and productivity. Core bits have larger diameters than standard carbide bits, allowing smaller hammers to drill larger holes. The bits are for dry drilling in concrete, block, and brick, and are ideal for drilling larger holes in masonry for piping, ventilation, and electrical installations. For increased versatility, the bit is interchangeable with Makita SDS-MAX or Spline rotary hammer carbide core bit shank adaptors (sold separately).\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66656 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 2-5\/8\" Rotary Hammer Core Bit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66656 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eCore bit for 2 piece bit system for increased versatility and productivity\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Makita SDS-MAX or Spline Rotary Hammer Core Bit Shank Adapters\u003c\/li\u003e\n\u003cli\u003eAsymmetrical tungsten carbide teeth for faster drilling and longer life\u003c\/li\u003e\n\u003cli\u003eFor making through-holes in masonry for piping, ventilation and electrical installations\u003c\/li\u003e\n\u003cli\u003eCore bits have larger diameters than standard carbide bits allowing smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003e4\" overall length\/3\" usable length\u003c\/li\u003e\n\u003cli\u003eFor drilling in concrete, block and brick\u003c\/li\u003e\n\u003cli\u003eFor dry drilling only\u003c\/li\u003e\n\u003cli\u003eFor use with rotary hammers\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66656 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 2-5\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUsable Length \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 1.69 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539562\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674640630051,"sku":"590446","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66656_01_36e3c4a3-e14d-4dfb-b119-7195ae7db1c3.jpg?v=1755654750"},{"product_id":"makita-b-66662-3-1-8-rotary-hammer-core-bit","title":"Makita B-66662 3-1\/8\" Rotary Hammer Core Bit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66662 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita Rotary Hammer Core Bits feature asymmetrical tungsten carbide teeth for faster drilling and longer life. Bit is part of a 2-piece core bit system that increases versatility and productivity. Core bits have larger diameters than standard carbide bits, allowing smaller hammers to drill larger holes. The bits are for dry drilling in concrete, block, and brick, and are ideal for drilling larger holes in masonry for piping, ventilation, and electrical installations. For increased versatility, the bit is interchangeable with Makita SDS-MAX or Spline rotary hammer carbide core bit shank adaptors (sold separately).\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66662 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 3-1\/8\" Rotary Hammer Core Bit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66662 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eCore bit for 2 piece bit system for increased versatility and productivity\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Makita SDS-MAX or Spline Rotary Hammer Core Bit Shank Adapters\u003c\/li\u003e\n\u003cli\u003eAsymmetrical tungsten carbide teeth for faster drilling and longer life\u003c\/li\u003e\n\u003cli\u003eFor making through-holes in masonry for piping, ventilation and electrical installations\u003c\/li\u003e\n\u003cli\u003eCore bits have larger diameters than standard carbide bits allowing smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003e4\" overall length\/3\" usable length\u003c\/li\u003e\n\u003cli\u003eFor drilling in concrete, block and brick\u003c\/li\u003e\n\u003cli\u003eFor dry drilling only\u003c\/li\u003e\n\u003cli\u003eFor use with rotary hammers\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66662 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 3-1\/8\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUsable Length \u003c\/td\u003e\n \u003ctd\u003e 3\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 2.2 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539579\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674641285411,"sku":"590447","price":248.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66662_01_6fc7aa8c-cc81-4637-91db-9fa9978a2adf.jpg?v=1755654759"},{"product_id":"makita-b-66678-4-rotary-hammer-core-bit","title":"Makita B-66678 4\" Rotary Hammer Core Bit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66678 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita Rotary Hammer Core Bits feature asymmetrical tungsten carbide teeth for faster drilling and longer life. Bit is part of a 2-piece core bit system that increases versatility and productivity. Core bits have larger diameters than standard carbide bits, allowing smaller hammers to drill larger holes. The bits are for dry drilling in concrete, block, and brick, and are ideal for drilling larger holes in masonry for piping, ventilation, and electrical installations. For increased versatility, the bit is interchangeable with Makita SDS-MAX or Spline rotary hammer carbide core bit shank adaptors (sold separately).\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66678 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 4\" Rotary Hammer Core Bit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66678 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eCore bit for 2 piece bit system for increased versatility and productivity\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Makita SDS-MAX or Spline Rotary Hammer Core Bit Shank Adapters\u003c\/li\u003e\n\u003cli\u003eAsymmetrical tungsten carbide teeth for faster drilling and longer life\u003c\/li\u003e\n\u003cli\u003eFor making through-holes in masonry for piping, ventilation and electrical installations\u003c\/li\u003e\n\u003cli\u003eCore bits have larger diameters than standard carbide bits allowing smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003e4\" overall length\/3\" usable length\u003c\/li\u003e\n\u003cli\u003eFor drilling in concrete, block and brick\u003c\/li\u003e\n\u003cli\u003eFor dry drilling only\u003c\/li\u003e\n\u003cli\u003eFor use with rotary hammers\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66678 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUsable Length \u003c\/td\u003e\n \u003ctd\u003e 3\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 2.98 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539586\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674641645859,"sku":"590448","price":306.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66678_01_86c97350-562f-4e28-9cb6-f87656b76e8c.jpg?v=1755654774"},{"product_id":"makita-b-66690-6-rotary-hammer-core-bit","title":"Makita B-66690 6\" Rotary Hammer Core Bit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66690 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita Rotary Hammer Core Bits feature asymmetrical tungsten carbide teeth for faster drilling and longer life. Bit is part of a 2-piece core bit system that increases versatility and productivity. Core bits have larger diameters than standard carbide bits, allowing smaller hammers to drill larger holes.The bits are for dry drilling in concrete, block, and brick, and are ideal for drilling larger holes in masonry for piping, ventilation, and electrical installations. For increased versatility, the bit is interchangeable with Makita SDS-MAX or Spline rotary hammer carbide core bit shank adaptors (sold separately).\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66690 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 6\" Rotary Hammer Core Bit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66690 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eCore bit for 2 piece bit system for increased versatility and productivity\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Makita SDS-MAX or Spline Rotary Hammer Core Bit Shank Adapters\u003c\/li\u003e\n\u003cli\u003eAsymmetrical tungsten carbide teeth for faster drilling and longer life\u003c\/li\u003e\n\u003cli\u003eFor making through-holes in masonry for piping, ventilation and electrical installations\u003c\/li\u003e\n\u003cli\u003eCore bits have larger diameters than standard carbide bits allowing smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003e4\" overall length\/3\" usable length\u003c\/li\u003e\n\u003cli\u003eFor drilling in concrete, block and brick\u003c\/li\u003e\n\u003cli\u003eFor dry drilling only\u003c\/li\u003e\n\u003cli\u003eFor use with rotary hammers\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66690 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 6\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUsable Length \u003c\/td\u003e\n \u003ctd\u003e 3\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 5.98 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539609\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674642039075,"sku":"590449","price":420.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66690_01_12944691-6900-43f3-aea8-2ee894c5423e.jpg?v=1755654783"},{"product_id":"makita-b-66684-5-rotary-hammer-core-bit","title":"Makita B-66684 5\" Rotary Hammer Core Bit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66684 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita Rotary Hammer Core Bits feature asymmetrical tungsten carbide teeth for faster drilling and longer life. Bit is part of a 2-piece core bit system that increases versatility and productivity. Core bits have larger diameters than standard carbide bits, allowing smaller hammers to drill larger holes. The bits are for dry drilling in concrete, block, and brick, and are ideal for drilling larger holes in masonry for piping, ventilation, and electrical installations. For increased versatility, the bit is interchangeable with Makita SDS-MAX or Spline rotary hammer carbide core bit shank adaptors (sold separately).\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66684 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 5\" Rotary Hammer Core Bit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66684 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eCore bit for 2 piece bit system for increased versatility and productivity\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Makita SDS-MAX or Spline Rotary Hammer Core Bit Shank Adapters\u003c\/li\u003e\n\u003cli\u003eAsymmetrical tungsten carbide teeth for faster drilling and longer life\u003c\/li\u003e\n\u003cli\u003eFor making through-holes in masonry for piping, ventilation and electrical installations\u003c\/li\u003e\n\u003cli\u003eCore bits have larger diameters than standard carbide bits allowing smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003e4\" overall length\/3\" usable length\u003c\/li\u003e\n\u003cli\u003eFor drilling in concrete, block and brick\u003c\/li\u003e\n\u003cli\u003eFor dry drilling only\u003c\/li\u003e\n\u003cli\u003eFor use with rotary hammers\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66684 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 5\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUsable Length \u003c\/td\u003e\n \u003ctd\u003e 3\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 4\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e 4.57 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539593\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674642497827,"sku":"590450","price":335.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66684_01_3455235a-ab57-4355-840f-cfde0b456d6f.jpg?v=1755654795"},{"product_id":"makita-b-66709-7-16-x-4-1-2-rotary-hammer-core-bit-centering-bit","title":"Makita B-66709 7\/16\" x 4-1\/2\" Rotary Hammer Core Bit Centering Bit","description":"\u003cdiv class=\"product-details-description\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66709 Description\u003c\/h4\u003e\n \u003cp class=\"product-details-short-description-text\"\u003e\n Makita Rotary Hammer Core Bit Centering Bits features a carbide-tipped tapered bit for faster and more accurate starts. Centering bits have larger diameters than standard carbide bits, allowing smaller hammers to drill larger holes. A high-grade steel construction provides increased durability. The bits are for dry drilling in concrete, block, and brick. For increased versatility, the bit is interchangeable with Makita SDS-MAX or Spline rotary hammer carbide core bit shank adaptors (sold separately).\n \u003c\/p\u003e\n \u003c\/div\u003e\u003cdiv class=\"product-details-includes\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66709 Includes\u003c\/h4\u003e\n \u003cul class=\"product-details-includes-list\"\u003e\n \u003cli\u003e(1) 7\/16\" x 4-1\/2\" Rotary Hammer Core Bit Centering Bit\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-features\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66709 Features\u003c\/h4\u003e\n \u003cul class=\"product-details-features-list\"\u003e\n \u003cli\u003eCarbide-tipped tapered bit for faster and more accurate starts\u003c\/li\u003e\n\u003cli\u003e4-1\/2\" overall length\/ 3-1\/2\" usable legth\u003c\/li\u003e\n\u003cli\u003eHigh grade steel construction for increased durability\u003c\/li\u003e\n\u003cli\u003eCore bits have larger diameters than standard carbide bits allowing smaller hammers to drill larger holes\u003c\/li\u003e\n\u003cli\u003eFor drilling in concrete, block and brick\u003c\/li\u003e\n\u003cli\u003eFor use with Makita 2 piece SDS-MAX and Spline rotary hammer core bits\u003c\/li\u003e\n \u003c\/ul\u003e\n\u003c\/div\u003e\n \u003cdiv class=\"product-details-specs\"\u003e\n \u003ch4 class=\"product-details-section-title\"\u003eMakita B-66709 Specifications\u003c\/h4\u003e\n \u003ctable\u003e\n \u003ctr\u003e\n \u003ctd\u003eDiameter \u003c\/td\u003e\n \u003ctd\u003e 7\/16\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUsable Length \u003c\/td\u003e\n \u003ctd\u003e 3-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eOverall Length \u003c\/td\u003e\n \u003ctd\u003e 4-1\/2\"\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003ePackage Quantity \u003c\/td\u003e\n \u003ctd\u003e 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eShipping Weight \u003c\/td\u003e\n \u003ctd\u003e .17 lbs.\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eUPC Code \u003c\/td\u003e\n \u003ctd\u003e 088381-539616\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":47674642792739,"sku":"590451","price":17.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/0159\/4403\/files\/Makita-B-66709_01_93817d76-1751-4f8a-b342-b0a851e40105.jpg?v=1755654806"}],"url":"https:\/\/toolup.com\/collections\/makita-to-exclude.oembed","provider":"Toolup","version":"1.0","type":"link"}