1
of
8
Loading...
Simpson Anchors | SKU:
STB2-508124SS
Simpson Strong-Tie STB2-508124SS (1/2" x 8-1/2") Strong-Bolt 2 Wedge Anchor 304 Stainless Steel (25 Pack)
$161.29
Unit price
/
Unavailable
Description
Description
Simpson Strong-Tie STB2-508124SS Description
Simpson Strong-Bolt 2 anchors are non-bottom-bearing, ICC-ES code compliant anchors made to be installed in cracked or uncracked concrete. Strong-Bolt 2 Wedge anchors are qualified for both static and seismic loading and suitable for horizontal, vertical and overhead applications.
Simpson Strong-Tie STB2-508124SS Includes
- (25) 1/2" x 8-1/2" Strong-Bolt 2 Wedge Anchor
Simpson Strong-Tie STB2-508124SS Features
- Chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3 1/4", and lightweight concrete-over-steel deck
- Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
- Tested per ACI355.2 and AC193
Simpson Strong-Tie STB2-508124SS Applications
- Concrete anchoring in cracked or uncracked concrete
- Seismic and static load applications
- Horizontal, vertical, and overhead installations
Simpson Strong-Tie STB2-508124SS Installation Overview
- Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified minimum hole depth, and blow it clean using compressed air.
- Assemble the anchor with nut and washer so the top of the nut is flush with the top of the anchor. Place the anchor in the fixture, and drive it into the hole until the washer and nut are tight against the fixture.
- Tighten to the required installation torque.
Simpson Strong-Tie STB2-508124SS Specifications
| Diameter | 1/2" |
| Length | 8-1/2" |
| Material | 304 Stainless Steel |
| Drill bit size | 1/2" |
| Installation torque | 65 ft. lbs |
| Thread length | 6" |
NOTE: Do not use an impact wrench to set or tighten the Strong-Bolt 2 anchor. Oversized holes in the base material will make it difficult to set the anchor and will reduce the anchor's load capacity.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
