CS Unitec Ex801-6B Copper Beryllium Non-Sparking, Non-Magnetic, Corrosion Resistant Flat Head Screwdriver 1/4" (6 mm)
Description
Description
CS Unitec Ex801-6B Description
CS Unitec's non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability. With over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications. Non-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical/paper manufacturing, and shipyards. *Any misuse, abuse or normal service wear is not covered under this warranty.
CS Unitec Ex801-6B Includes
- (1) Screwdriver Non-Sparking
CS Unitec Ex801-6B Features
- Non-Sparking, Non-Magnetic & Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones
- Lifetime Warranty, ISO 9001:2015 manufactured, TUV certified
- Non-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present
- The non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.
- These corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.
- Keep the screwdriver handle clean; a greasy handle is apt to cause an accident. Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made. Use a ratchet-type screwdriver for speed and comfort when a great number of screws are to be driven. A rounded tip should be redressed with a file; make sure the edges are straight. Use an offset screwdriver in close quarters where a conventional screwdriver cannot be used. Use a screw-holding screwdriver to get screws started in awkward, hard-to-reach areas.
- Don't use a screwdriver with rounded edges or tips; it will slip and cause damage to the work or yourself. Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose. Don't hold the work in one hand while using the screwdriver with the other. If the screwdriver slips out of the slot (we told you to use the right size screwdriver!) you will be most likely to receive a gash on your hand. Don't use a screwdriver for prying, punching, chiseling, scoring, or scraping. Don't use a screwdriver to check a storage battery or to determine if an electrical circuit is live. Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade. Don't use a screwdriver near a live wire or for electrical testing. Don't use a screwdriver with a split or broken handle. Don't use a screwdriver for stirring paint.
- Very durable due to high hardness and tensile strength
- Non-ferrous components; safer for applications demanding non-magnetic properties
CS Unitec Ex801-6B Specifications
| Dimension B | 6" (150 mm) |
| Dimension I | 250 mm |
| Dimension A | 1/4" (6 mm) |
| Alloy | Copper-Beryllium (CuBe) |
| Zone Compatibility | ATEX Directive 1999/92/EC for work in Zones 0 / 1 / 2 / 20 / 21 / 22 / M1 / M2 |
| Rockwell Hardness | 38 |
| Composition | Be |
| WARNING | This product can expose you to chemicals including Styrene and Di-n-hexyl phthalate (DnHP) that are known to the State of California to cause cancer, and Di-n-hexyl phthalate (DnHP) that is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Weight | 0.11 Lbs (0.048 Kg) |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
